main logo

4g Gsm Hat For Raspberry Pi

I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento: 19 settembre 2025
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 77,99 € SU AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible With Raspberry Pi Series Boards/Jetson Nano
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi Jetson Nano Based on SIM7600G-H Supports LTE CAT4 up to 150Mbps for Downlink Data Transfer The Global Version Positioning Module
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Supports dial-up, telephone call, SMS, , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on. Onboard CP2102 USB to UART converter, for serial debugging. Onboard audio jack and audio decoder for making telephone call. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
  • Breakout UART control pins, to connect with host boards like Arduino/STM32. SIM card slot, supports 1.8V/3V SIM card. TF card slot for storing data like files, messages, etc. 2x LED indicators, easy to monitor the working status.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • 96,99 € SU AMAZON
IBest
IBest
IBest 4G / 3G / 2G / GSM/GPRS/GNSS HAT for Raspberry Pi, Jetson Nano,Based on SIM7600G-H, Support LTE CAT4, 4G Connection, Global Positioning
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.Onboard USB to UART converter, for serial debugging
  • Breakout UART control pins, to connect with host boards like Arduino/STM32.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT. Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Packing List: .SIM7600G-H 4G HAT x1;LTE Antenna x1 ;GPS External Antenna (B) x1;USB type A plug to micro plug cable x2;RPi screws pack (2pcs) x1
  • 83,65 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM7600G-H M.2 4G Hat for Raspberry Pi LTE CAT4 High Speed Global Coverage Multi Band 4G/3G/2G Communication and GNSS Positioning
Spedizione gratuita
star

86

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • ✅Supports dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S), and so on. GNSS positioning: GPS, Beidou, Glonass, Galileo, QZSS, LBS base station
  • ✅USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 4G communication. Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Aduino
  • ✅Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
  • ✅Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status. Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
  • ✅Onboard audio jack and audio decoder, allows audio operation like making phone call. High efficiency power supply circuit, up to 3A output current
  • ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
  • 107,99 € SU AMAZON
Waveshare
Waveshare
4G/3G/2G/GSM/GPRS/GNSS Hat Based SIM7600E-H for Raspberry Pi/Jetson Nano Support LTE CAT4 for Downlink Data Transfer/4G High-Speed Connection/Telephone Call/Sending SMS
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc; Supports GPS, BeiDou, Glonass, LBS base station positioning; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Onboard CP2102 USB to UART converter, for serial debugging; Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Onboard audio jack and audio decoder for making telephone call;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper;Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), development resources: www.waveshare.com/wiki/SIM7600E_4G_HAT
  • 82,55 € SU AMAZON
Waveshare
Waveshare
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi/Jetson Nano Based SIM7600G-H Global Position Support LTE CAT4 for Dial-up, Phone Call, SMS, MMS, Mail, TCP, UDP, DTMF, HTTP, FTP
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano; Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.; Supports GPS, BeiDou, Glonass, LBS base station positioning;Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on;Onboard CP2102 USB to UART converter, for serial debugging;Onboard audio jack and audio decoder for making telephone call;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
  • SIM card slot, supports 1.8V/3V SIM card; TF card slot for storing data like files, messages, etc.;2x LED indicators, easy to monitor the working status; Baudrate: 300bps ~ 4Mbps (default: 115200bps);Autobauding baudrate: 9600bps ~ 115200bps;Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),download: www.waveshare.com/wiki/SIM7600G-H_4G_HAT
  • 93,50 € SU AMAZON
Waveshare
Waveshare
Waveshare GSM/GPRS/GNSS Hat Expansion Board, with Low Power Consumption, Based on SIM868, Compatible with Raspberry Pi
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Standard Raspberry Pi 40PIN GPIO Extension Header, Supporti Raspberry Pi series Boards, Jetson Nano; Supporto SIM applicazione toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 39,99 € SU AMAZON
TUOPUONE
TUOPUONE
R800C GSM/GPRS HAT compatibile con schede Raspberry Pi Series, Jetson Nano supporta funzionalità di comunicazione multipla 2G, chiamata telefonica e SMS
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • ✨Questo è un HAT ufficiale di GSM/GPRS R800C di Waveshare.Support RPi Zero/Zero W/Zero WH/2B/3B/3B+/4B.Supports SMS, chiamata telefonica, GPRS, TCP/IP, DTMF, HTTP, FTP, ecc.
  • ✨2x indicatori LED, facile da monitorare lo stato di lavoro. Slot per scheda SIM, supporta scheda SIM 1.8V / 3V
  • ✨Supporta l'applicazione SIM toolkit: GSM 11.14 Rilascio 99.Baudrate: 2400bps ~ 115200bps (115200bps per impostazione predefinita)
  • ✨Controllo tramite comandi AT (comandi AT migliorati 3GPP TS 27.007, 27.005 e SIMCOM)
  • ✨Viene fornito con risorse di sviluppo online e manuale (esempi per RPi/Jetson Nano/Arduino/STM32)
  • 23,99 € SU AMAZON
sb components
sb components
PiTalk 4G HAT IoT abilitato 4G HAT per Raspberry Pi Comunicazione e GNSS Posizionamento Quectel EG25-G Global Band 4G LTE/WCDMA/GSM/GPRS HAT, Supporta Dial-up, Telefonata, SMS, TCP, ecc.
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • PiTalk 4G è una soluzione di connettività cellulare basata sul modulo Quectel EG25-G LTE Cat 4, che supporta velocità dati fino a 150 Mbps downlink e uplink a 50 Mbps per applicazioni M2M e IoT.
  • Il dispositivo è compatibile con le bande globali e supporta 3G e 4G LTE con fallback 2G, comprese le bande 4G LTE-FDD e 4G LTE-TDD.
  • Il supporto GNSS integra la tecnologia di localizzazione Qualcomm IZat Gen8C Lite, inclusi GPS, GLONASS, BeiDou/Compass, Galileo e QZSS e 1x connettore U.FL.
  • PiTalk 4G dispone di un supporto per schede NanoSIM, jack audio da 3,5 mm, connettore per altoparlanti a 2 pin, 1 connettore SMA e 1 connettore U.FL per connettività cellulare e supporto audio.
  • Con un tasto di accensione e LED di rete, stato e alimentazione, PiTalk 4G consente di effettuare e ricevere chiamate, inviare/ricevere messaggi SMS e accedere a dati ad alta velocità tramite Raspberry Pi o altro dispositivo host con basso consumo energetico.
  • 158,00 € SU AMAZON
raspberry pi 4g hat 4g/lte base hat for raspberry pi raspberry 4g hat game hat for raspberry pi 4g raspberry pi raspberry pi 4g mini pcie hat for raspberry pi hat raspberry pi raspberry pi 4 4g raspberry pi hat