main logo

Betafpv 85

I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento: 20 settembre 2025
BETAFPV
BETAFPV
BETAFPV ExpressLRS Lite Receiver with Flat SMD Ceramic Antenna High Refresh Rate Long Range Performance Compatible for 65/75/85mm FPV Racing Whoop Drone V1.2
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Updated: Building on the open-source ExpressLRS framework – renowned for delivering ultra-low latency, blistering speeds, and exceptional range – the upgraded Lite Receiver flat antenna V1.2 now features an extra-thin 3mm board, an ultra-lightweight 0.46g design, and enlarged soldering pads. Optimised impedance matching elevates signal reliability and sensitivity, enabling 300m range at 25mW transmitter power and up to 1000m at 50mW, pushing the boundaries of long-range potential in micro-sized receivers
  • Enhanced Signal Reliability & Sensitivity: The flat antenna V1.2’s optimised impedance matching unlocks a transformative leap in signal reliability and sensitivity. Where the original flat antenna V1.1 achieved 500-600m at 50 transmitter power/500Hz, the V1.2 now delivers a robust 1000m under identical conditions, alongside superior signal consistency. This precision-tuned design minimises packet loss during high-speed manoeuvres and enhances low-power efficiency, ensuring crisp responsiveness at 25 (300m range) and unwavering stability at max output
  • Lightweight Design, Simplified Installation: In response to community feedback, the flat antenna V1.2 now features enlarged soldering pads designed to simplify installation and reduce errors – a critical upgrade for both novices and seasoned builders. Combined with a 13.2% weight reduction (now just 0.46g), the updated design retains its compact footprint while shedding unnecessary mass, freeing up crucial weight budgets for performance-focused builds
  • Flat Antenna: The Lite Receiver flat antenna V1.2 boasts a 3mm ultra-thin board and 0.46g lightweight design, perfect for space-limited drones. Its low-profile, crash-resistant build offers greater durability than traditional tower antennas. The V1.2’s optimised impedance matching enhances signal reliability and sensitivity, extending its range to 1,000m. This upgrade focuses on refining the flat antenna’s crash resistance, providing pilots with unmatched range and durability in a compact form
  • Note: Now the firmware version of Lite Receiver flat antenna V1.2 is ELRS 3.3.0; ELRS Innovative team has officially released version 3.3.0. If you want to flash official ELRS firmware, please download the latest ExpressLRS-Configurator or read our manual for flashing it. Significantly, the TX module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully
  • Configuration & Bind: ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. For more binding details, please refer to manual or the product picture
  • 16,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV 4pcs BT2.0 550mAh 1S Battery 4.35V 40C/80C Lipo Battery with BT2.0 Connector Compatible for 75-85mm 1S FPV Racing Whoop Drone Quadcopters like Meteor75 Pro FPV Drone
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • 【Higher Capacity】Compared with the BT2.0 450mAh 1S battery, BT2.0 550mAh 1S battery updated the capacity to 550mAh. It is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). Greatly improved battery discharge performance.
  • 【Powerful Performance】BT2.0 550mAh 1S Battery has stable current&voltage output and high efficiency. Larger capacity ensures strong power and increases the flight time for the whoop drones.
  • 【Suitable Drone】BT2.0 550mAh 1S lipo battery weighs only 14g/pc with a size of 69.5*1 6.2*6.5mm, it is suitable for all 1S brushless drones like Meteor75, Meteor75 Pro. Especially for Meteor75 Pro, pilots will achieve dynamic balance and get stable and consistent power.
  • 【BT2.0 Connector】BT2.0 connector decreased the internal resistance of the connector effectively by upgrading the crimped pins to a 1.0mm banana connector and increasing the cross-sectional area of the 1.0mm banana connector.
  • 【Notice】Please Don't charge a cell with physical damage or in puffed. Don't over-charge, or over-discharge batteries. Don't put it beside the high-temperature condition or a humid environment.
  • 31,99 € SU AMAZON
KINGDUO Montaggio della Fotocamera Stampata in 3D per Betafpv 85X Caddx Turtle V2 Whoop FPV Racing Drone-Blu
star

95

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3
KINGDUO Montaggio della Fotocamera Stampata in 3D per Betafpv 85X Caddx Turtle V2 Whoop FPV Racing Drone-Rosso
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4
KINGDUO Montaggio della Fotocamera Stampata in 3D per Betafpv 85X Caddx Turtle V2 Whoop FPV Racing Drone-Verde
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5
BETAFPV
BETAFPV
BETAFPV 4pcs 1103 11000KV Brushless Motor FPV RC Brushless Motors for 2S Lipo Battery 2S Frame Beta75X Beta85X Whoop Drone
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Betafpv 1103 brushless motors are suitable for Betafpv 2S frame racing drone by BETAFPV Hobby, which is the first brushless motor reach to 11000KV.
  • Size of motor: 13.5mm*13.5mm*16mm. Weight: 3.25g/1pc. Shaft Diameter: 1.5mm.
  • Voltage: 7.4V, 2S Lipo battery. KV (rpm/V): 11000.
  • The motor mount holes of 1103 motor is 8.5mm, for Betafpv 2S FPV frame only, not for the other 80-110mm frame.
  • Please read the Precautions and Recommend Parts before built a quadcopter drone. It is better for beginner to build under a experience FPV player. If you occur the issue of motor not spin up properly, go to BETAFPV Support Freshdesk or contact us for help.
  • 43,99 € SU AMAZON
VIDOO
VIDOO
VIDOO Montaggio della Fotocamera Stampata in 3D per Betafpv 85X Caddx Turtle V2 Whoop FPV Racing Drone-Rosso
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Nome dell'elemento: 3D Printed Camera Mount
  • Colore: Blu, Rosso, Verde
  • Peso: 5g
  • Alta qualità
  • Facile da usare
  • 21,90 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV 2 pezzi Air65 II 65 mm Brushless Whoop Frame Kit per fai da te Ultralight Weight 1S Micro Racing FPV Quadcopter compatibile per Matrix 1S FC, 31mm/1219S eliche 07xx 08xx Series Motors
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Il telaio Air65 II da 2,65 g: co-sviluppato con pilota, ridefinisce l'agilità leggera. R&D streamlined 6 bracci a 4, ottimizzati dutts, and boosted thrust by 5% while improving PID response. La matrice PP resilient assorbe gli impatti di crash e dettagli rifiniti come la protezione delle viti e i fori FC enlarged garantiscono prestazioni durature, dominanti per un volo senza problemi
  • Frame Reshaped: +5% Thrust; per ridurre strategicamente il braccio da 6 a 4 e rifinire le aerodinamiche, l'Air65 II aumenta la tensione del 5% rispetto alla Gen 1 – fornisce una risposta immediata e una maggiore potenza per il quadricottero
  • Reliable Flight: seguono le rifiniture strutturali numerose, il nostro design finale del braccio riduce efficacemente le vibrazioni del telaio. Accoppiato con feedforward tuning, questo assicura una risposta pid perfetta con una posizione < 12 ms, traslazione a manoeuvres crisp e flusso di libero stile buttery-smooth
  • Materiale resiliente ottimizzato: il nostro polipropilene testato per battaglia blend foglie fuori baci concreti e punte per alberi. Survive your most violent freestyle crashes – and fly home
  • Dettagli del prodotto: slot fissati per il motore per garantire un allineamento preciso, nuove strutture di protezione delle viti del motore che deflettono gli impatti di crash, fori 1,2 mm FC adatti a viti da 1,4 mm e i nostri 12,4 mm lowered ducts (-0,6 mm) più profili sottili da 3,8 mm trasparenti corti per motori ovunque. Priorità pilota Meet engineering obsession
  • 13,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV 2 pezzi Air75 II Brushless Whoop Frame Kit with Motor Fix Slot, Ultra Light, Lowered Profile for DIY Ultra Light 75 mm 1S Racing Whoop Drone with Matrix 1S FC 07XX 08XX 1102 Motors 40 mm elica
Spedizione gratuita
star

74

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Il telaio Air75 II da 4 g: co-sviluppato con pilota, elevata agilità leggera. R & D riduce 6 bracci a 4, ottimizzati dutts, and boosted thrust by 11% while refining PID response. A reinforced PP matrix absorbs crashes, and upgrade like Screw protection, enlarged FC holes, and a sleeker duct profile ensure durability and dominance — engineered for relentless, worry-free flying
  • Frame Reshaped: +11% Thrust; per ridurre strategicamente il braccio da 6 a 4 e rifinire aerodinamica, l'Air75 II aumenta la tensione dell'11% rispetto alla Gen 1 – fornisce una risposta immediata e una potenza maggiore per il quadricottero
  • Reliable Flight: seguono le rifiniture strutturali numerose, il nostro design finale del braccio riduce efficacemente le vibrazioni del telaio. Associato con feedforward tuning, questo assicura una risposta pid perfetta per il passo, traslazione a manoeuvres crisp e flusso di freestyle buttery-smooth
  • Materiale resiliente ottimizzato: il nostro polipropilene testato per battaglia blend foglie fuori baci concreti e punte per alberi. Survive your most violent freestyle crashes – and fly home
  • Dettagli del prodotto: slot di fissaggio del motore per garantire un allineamento preciso, nuove strutture di protezione a vite del motore che deflettono gli impatti di crash e fori da 1,2 mm FC per viti da 1,4 mm. Where Pilot Priorities Meet engineering Obsession
  • 13,99 € SU AMAZON
BETAFPV
BETAFPV
BETAFPV 2pcs Air75 Brushless Whoop Frame Kit, Ultra Light, Lowered Profile, for DIY Ultra Light 75mm 1S Racing Whoop Drone, with Motor Fixed Slot&Gasket for 07XX 08XX 1102 Motors 40mm Propellers
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Weighing merely 4.45g, this frame is 1g lighter than its previous version while maintaining robustness and durability
  • With its new outer radial shape whoop duct structural design, is beneficial to weight reduction and wind resistance
  • The Motor Fixed Slot limits ensure convenient and stable installation of motors
  • By reducing the frame height, it effectively concentrates the lowered profile, delivering an enhanced flying experience
  • The Motor Gasket allows seamless pairing with motors from different brands, effectively preventing propeller strikes. It is compatible with 07-08 series motors and 40mm propellers
  • 14,99 € SU AMAZON
betafpv meteor 85 betafpv