Bondtech
I 10 migliori prodotti di luglio 2025
Ultimo aggiornamento:
11 luglio 2025
Bondtech
Bondtech LGX® Lite V2 eXtruder
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The Bondtech LGX Lite V2 is a filament feeder based on the LGX Large Gears eXtruder and uses Bondtechs new Dual Drive Technology based on larger drive gears.
Note: This extruder only supports 1.75 mm size filament and the extruder does not allow a mount plate between the motor and the extruder.
95,99 € SU AMAZON
Bondtech
Bondtech CHT® Coated Brass Nozzle 0,4 mm -1 pcs
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
These are nozzles for High Flow applications
Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
26,99 € SU AMAZON
Bondtech
Bondtech CHT Vol Coated Brass Nozzle - 0,4 mm -1 pcs
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
These are nozzles for High Flow applications, They are manufactured by Bondtech in-house.
Compatible with 2.85mm filament
Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
33,99 € SU AMAZON
Bondtech
Bondtech CHT® MK8 Coated Brass Nozzle 0,4 mm -1 pcs
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
These are nozzles for High Flow applications
Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
26,99 € SU AMAZON
Bondtech
Bondtech LGX Lite PRO eXtruder
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
The Bondtech LGX Lite PRO is a filament feeder based on the LGX Large Gears eXtruder and uses Bondtechs Dual Drive Technology based on larger drive gears. Includes full size LGX Steel Drive Train, maintenance windows and filament tension lever with 5 presets (open, rigid, hard rigid/semi flexible, flexible, soft flexible).
152,90 € SU AMAZON
Bondtech
Bondtech IFS Extruder for Prusa Mini or Mini+
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
New Bondtech Internal Filament Sensor Extruder for Prusa Mini. This extruder is an evolution of our previous high-resolution extruder upgrade for the Prusa Mini.Filament Sensor The new filament sensor for Prusa Mini/+ may be mounted inside the extruder housing.
The IFS Extruder for Prusa Mini may be used without the filament sensor. With a simple process it is easy to later update it to fit the Prusa Filament Sensor inside.
100,99 € SU AMAZON
Bondtech
Bondtech CHT BiMetal Vol Coated Nozzle - 0.40mm
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Increase the Max Volumetric Flow of your Volcano style heat block by 50%. Nozzle is supplied with Nickel Coating (grey color).
Will fit the following blocks/printers: E3D Volcano blocks Other Volcano type blocks Artillery Sidewinder X1 and X2 Anycubic Vyper FLSUN Super Racer Artillery Genius Pro Anycubic Kobra and Kobra Max Lulzbot TAZ MOARstruder Others compatible with Volcano
63,26 € SU AMAZON
Bondtech
BondTech Drivegear Kit 1.75 mm / 5 mm
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Bondtech drivegear kit in hardneded and surface protected steel. Precision cnc-machined.
These drivegear kits come as a set consisting of a primary drive gear, a secondary drive gear, bearings and a shaft.
A Lithium based grease is recommended to use on the gear section and inside the needle bearings for low friction and to avoid wear. A small dab of grease is enough.
40,61 € SU AMAZON
Bondtech
Bondtech Kit di riparazione per piscine idromassaggio, impermeabile, kit di riparazione trasparente per vasche idromassaggio, vasche idromassaggio, spa gonfiabili, letti gonfiabili, castello
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Kit di riparazione per forature ultra forte: il kit di riparazione per piscina crea un legame ultra forte e durevole tra la toppa in vinile e l'area di riparazione che resisterà alla prova del tempo ed è ermetico, flessibile e impermeabile
Riparazione rapida e facile delle forature: il kit di riparazione per piscine fornisce un metodo semplice e facile per rattoppare fori e forature utilizzando toppe trasparenti che si asciugano per garantire che l'estetica del prodotto sia mantenuta
Ampiamente usato: il kit di riparazione per piscina è molto adatto per giocattoli gonfiabili in PVC, letto ad aria, divano, barca gonfiabile, kayak, castello per bambini, cuscino d'aria, palla da spiaggia, anello da nuoto, piscina in PVC, giocattoli morbidi, trampolino in PVC, abbigliamento impermeabile in PVC
Facile da usare: prima pulire la superficie da incollare e mantenerla asciutta, applicare uniformemente il kit di riparazione del castello rimbalzante sulla toppa, incollare la toppa sull'area da riparare e attendere 24 ore per ottenere la migliore forza di adesione
Suggerimenti per l'uso: la chiave per riparare con successo le crepe è applicare una quantità appropriata di colla sulla toppa di riparazione e distribuirla uniformemente. La colla in PVC appartiene alla colla a base di solvente, quindi non è consigliabile applicare un adesivo eccessivo o spesso sulla toppa di riparazione per evitare l'ammorbidimento o l'arricciatura della toppa, che può influire sul suo utilizzo
16,98 € (0,28 € / kg) SU AMAZON
Bondtech
Bondtech LGX Steel Drive Train Upgrade Set
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Set of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder.
The upgrade Set works on: LGX LGX Lite LGX Lite Mirrored
51,19 € SU AMAZON
bondtech lgx
bondtech volcano
bondtech estrusore
bondtech extruder
estrusore bondtech