Compute Module 5 Io Board
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
24 dicembre 2025
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Single Board Only
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Standard CM5 socket and Raspberry Pi 40PIN GPIO header, suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
Onboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
46,99 € SU AMAZON
Waveshare
Waveshare Compute Module 5 IO Board, Compatible with All Variants of Raspberry Pi CM5, with PoE Feature, Bundle with PoE Base Board + Case + Power Supply Adapter
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Standard CM5 socket and Raspberry Pi 40PIN GPIO header suitable for all variants of Compute Module 5
Providing both network connection and power supply for your Raspberry Pi in one cable
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, support booting Raspberry Pi from NVMe Solid State Drive
ONboard Connectors Including MIPI / M.2 / HDMI / USB / ETH / TF Card Slot.each cut-out is completely aligned with the connector
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
69,99 € SU AMAZON
LUCKFOX
LUCKFOX CM5 IO Board - for Raspberry Pi Compute Module 5 Expansion Board with Dual HDMI, USB3.0, PoE Gigabit Ethernet Port, M.2 NVMe Solid State Drive Booting
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi CM5 - Suitable for all Compute Module 5 variants and can be used as a development board or integrated directly into end products.
High-speed storage expansion - Supports M.2 NVMe Solid State Drive (NVMe protocol only), with read/write speeds far exceeding those of micro TF cards, and supports booting from NVMe Solid State Drive.
Rich Interface Configuration - Provides dual HDMI outputs, dual USB 3.0 ports, and PoE Gigabit Ethernet port (RJ45) to meet multi-scenario connectivity needs.
Flexible compatibility - Supports 2280/2260/2242/2230 M.2 SSDs in four sizes to fit different storage scenarios.
Convenient Integration Design - Main interfaces are centrally and unilaterally arranged, simplifying the installation of the enclosure, compatible with HATs and PCIe modules, and quick to build a prototype system.
24,95 € SU AMAZON
Waveshare
Waveshare CM5 IO Board Metal Case, Compatible with Raspberry Pi Official Compute Module 5 IO Board, Comes with Cooling Fan
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Designed for Raspberry Pi official Compute Module 5 IO Board; Mini computer chassis, robust and nice looking
Make it easy to build your own Raspberry Pi CM5 mini PC
the standard 40PIN GPIO header is still available, making it easy to connect sorts of HATs
Each cut-out is completely aligned with the connector; Comes with cooling fan, combined with the airflow vent, better heat dissipation
Wall mount holes on two sides, handy for mounting. Binocular Vision, PoE Powered Raspberry Pi Projects, Or Other Industrial Context
26,99 € SU AMAZON
Geekworm
Geekworm X1500 CM5 IO Carrier Board for Raspberry Pi Compute Module 5 Support Dual M.2 NVMe SSD|1GbE Ethernet Port
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Compatibility: X1500 is compatible with Raspberry Pi Compute Module 5 CM5 and all CM5 variants
Function: Support Dual M.2 NVMe SSD, with 1GbE Ethernet Ports, Dual USB 3.0 Ports, Dual Hdmi 2.0 Ports, Dual MIPI DSI/CSI-2 Connectors, RTC, PWM Fan connector and convenient power button
How to Power: 5.1Vdc +/-5% 5A power via USB-C port of X1500; Please use power supply capable of delivering 5.1V at 5A output, an incompatible power supply with a lower output voltage may fail to power on the system
Packing List: 1 x X1500 CM5 IO Carrier Board, 1 x Screws Pack Accessories
Matching Metal Case (Not included): Case for Raspberry Pi CM5 and X1500 IO board, refer to X1500-C1 case (ASIN: B0F5WXFX3R)
59,00 € SU AMAZON
Waveshare
Waveshare Nano Base Board (B) For Raspberry Pi Compute Module 5, Same Size As The CM5
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
As the mini IO board of the Raspberry Pi Compute Module 5, CM5-NANO-A is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features integrated into a compact design, it is only the size of a CM5 and has interfaces including USB 3.2 Gen1, HDMI, audio, Ethernet port, etc.
Onboard default USB 3.2 Gen1 port.Type C can be used as a USB SLAVE interface to flash images.
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
USB TYPE A interface maximum power output 2A. It is forbidden to unplug and unplug any device other than USB when it is charged
27,99 € SU AMAZON
Waveshare
Mini Scheda di Base per Raspberry Pi Compute Module 5 Lite/eMMC, CM5 Mini IO Scheda con CM5 Socket/40PIN GPIO Header/RJ45 Gigabit Eth/16PIN PCIe/HDMI/USB 3.2/USB 2.0 Interfaccia ecc.
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Mini Base Board for Raspberry Pi Compute Module 5 Lite/eMMC series module, with onboard CM5 socket, Gigabit Ethernet RJ45 connector, 40PIN GPIO header, 16PIN PCIe, USB 3.2 Gen1 Type A × 2, USB 2.0 via 6PIN 1mm FFC connector × 2, 4-lane MIPI interface × 2 , HDMI port × 2, RTC etc.
Do not plug or unplug any device other than USB and HDMI when the device is powered on. When you need to use POE, connect the POE jumper cap to the EN position
The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
Type C can be used as a USB SLAVE interface to flash images. Do not connect other devices when using Type C to flash. Insufficient power supply for flashing will cause the device to be unrecognized. Onboard default 2 USB 3.2 Gen1 ports. The USB ports have a total maximum power output of 2A
Supports 4 screens to display different contents, adds MIPI DSI driver, regardless of whether a screen is connected, the system will default to connect, the screen will display in split-screen mode (related to the system version)
33,56 € SU AMAZON
Waveshare
Waveshare Mini Base Board, Mini-WaComputer Designed for Raspberry Pi Compute Module 5 (NOT Included), Including Metal Case and Power Supply
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Compute Module Compatibility & Connectors: The base board is designed to support all variants of the Raspberry Pi Compute Module 5 (CM5) and features a 16PIN PCIe Gen2/3 x1 connector, as well as a Raspberry Pi 40PIN GPIO header for versatile expansion.
Networking & USB: Equipped with a Gigabit Ethernet RJ45 connector for fast networking and dual USB 3.2 Gen1 Type-A ports. Additionally, it includes two USB 2.0 ports through a 6PIN 1mm FFC connector for additional peripherals.
Display & Video: Dual 4-lane MIPI interfaces (each with a 22pin 0.5mm FFC connector) and two HDMI ports (one via FFC connector) support dual 4K video outputs for high-quality multimedia performance.
Storage & Power: Includes a TF card slot for the Compute Module 5 Lite variant (without eMMC) and provides a stable 5V, 5A DC power input. The board also features onboard EEPROM and an encryption chip for enhanced functionality and security.
Dimensions & Cooling: The base board measures 85 × 56mm, while the included metal case adds a compact size of 90 × 68mm. It also features a 5V, 4PIN JST-SH PWM fan header for efficient cooling. Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
51,99 € SU AMAZON
Waveshare
Waveshare Mini Base Board (A) for Raspberry Pi Compute Module 5 Lite/Emmc Series Module,Suitable for Evaluating The Raspberry Pi CM5
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Mini Base Board for Compute Module 5,suitable for evaluating the Raspberry Pi CM5 or being integrated into end products
Powerful functions in a credit card sized body
Connecting with Compute Module 5.Standard CM5 socket and color-coded Raspberry Pi 40PIN GPIO header.suitable for Compute Module 5 Lite/eMMC series module
Compact, yet Complete.onboard multiple connectors, more convenient to use
It comes with two USB3.2 Gen1 ports and two USB2.0 ports onboard, making it convenient for users.
31,67 € SU AMAZON
Waveshare
Scheda di Base per Raspberry Pi Compute Module 5 Lite/eMMC, Stessa Dimensione del CM5, con CM5 Socket /40PIN GPIO Header/USB 3.2/MIPI/TF Card Socket Interfaccia ecc.
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Nano Base Board for Raspberry Pi Compute Module 5 Lite / eMMC, same size as the CM5, suitable for evaluating the Rasp Pi CM5 or being integrated into end products
CM5 Nano Base Board with CM5 socket, suitable for all variants of Compute Module 5, onboard 40PIN GPIO interface, suitable for connecting to various HAT modules
Onboard USB 3.2 Gen1 high speed interface, for connecting sorts of USB devices
Onboard Dual MIPI interfaces, for connecting to DSI displays or CSI cameras
Compact size and fully functional, with multiple peripheral interfaces, suitable for narrow application environments
23,03 € SU AMAZON
#1 VINCITORE
