main logo

E-paper E-ink Touch Display

I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento: 18 settembre 2025
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 35,19 € SU AMAZON
Waveshare
Waveshare
2.9 pollici E-Paper E-Ink Touch Display per Raspberry Pi Pico 296×128 Due Colori Touch epaper Display Modulo Supporto Touch a 5 Punti Aggiornamento Parziale 3.3V Interfaccia SPI/I2C
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • 2.9 inch Touch e-Paper Module for Raspberry Pi Pico, 296×128 resolution, black / white E-Ink display, onboard female pin header for direct attaching to Raspberry Pi Pico
  • 2.9 inch capacitive touch ePaper module support 5-points touch, toughened glass touch panel, user-defined wakeup gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI Communication / I2C Touch Port interface, requires minimal IO pins
  • 31,55 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 "Tocco E-Paper E-Ink Display HAT Per Raspberry Pi 5 punti Touch capacitivo 296 × 128 pixel in bianco e nero Supporto Aggiornamento parziale Interfaccia SPI
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Modulo ePaper capacitivo da 2,9 pollici, risoluzione 296 × 128. Supporto touch a 5 punti, gesto di sveglia definito dall'utente.
  • Nessuna retroilluminazione, continua a visualizzare l'ultimo contenuto per un lungo periodo di tempo anche quando si spegne.
  • Consumo energetico ultra basso, praticamente l'alimentazione è necessaria solo per rinfrescare.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi.
  • Interfaccia di controllo invertita, per il collegamento con schede controller come STM32, ecc. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi).
  • 36,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display HAT for Raspberry Pi Black/White Color 250×122 Pixels, Support Partial/Full Refresh 5-Point Capacitive Touch with SPI Interface
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels,Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down,Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • 31,99 € SU AMAZON
Coolwell
Coolwell
Coolwell 2.13inch Touch E-Paper E-Ink Display Module For Raspberry Pi Zero/Zero W, with ABS Protection Case, 5-point Touch,250×122 Pixels
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels
  • Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • 35,51 € SU AMAZON
IBest
IBest
2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Flexible E-Ink Raw Display Without PCB 212x104 Black/White Dual-Color E-Paper SPI Interface Supports Partial Refresh for Raspberry Pi/Arduino/STM32
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • This is a flexible E-Ink raw display, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Down wiki: www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(D)
  • 12,95 € SU AMAZON
Coolwell
Coolwell
2.9inch Touch E-Paper E-Ink Display HAT For Raspberry Pi Series Board, 5-Points Capacitive Touch, 5-points Touch,296×128 Pixels, SPI Interface
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 2.9inch capacitive touch ePaper module, 296×128 resolution; 5-points touch support, user-defined wakeup gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Reversed control interface, for connecting with controller boards like Ardui/STM32, etc.; Comes with development resources and manual (examples for Raspberry Pi)
  • 33,99 € SU AMAZON
TUOPUONE
TUOPUONE
TUOPUONE Display E-Paper E-Ink Touch da 2,15 pollici compatibile con Raspberry Pi Zero/Zero W 250 × 122 Risoluzione ABS Custodia a bassa potenza Ampio angolo di visione
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • ✨2.13 pollici touch capacitivo e-Paper display, tocco a 5 punti, pixel 250×122
  • ✨Supporta il risveglio tramite gesti definiti dall'utente
  • ✨Nessuna retroilluminazione, continua a visualizzare l'ultimo contenuto per un lungo periodo di tempo anche quando si spegne
  • ✨ Consumo energetico ultra basso, praticamente l'alimentazione è necessaria solo per rinfrescare
  • ✨Standard RPi 40PIN GPIO estensione header, supporta schede serie RPi
  • 35,51 € SU AMAZON
e-paper display touch e ink electronic paper display display e ink display e-ink e ink display e-ink display e ink e paper e ink paper e-ink paper e-paper e-ink