main logo

Eink Display

I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento: 17 giugno 2025
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
IBest
IBest
2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • 7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
  • Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 107,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 3.52inch e-Paper Display (B), e-Ink Display, 360x240, Red/Black/White, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico, Support Jetson Nano/TX2/Xavier N/Orin and RDK X3
Spedizione gratuita
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 29,99 € SU AMAZON
QIQIAZI
QIQIAZI
2,13 Pollici LoRa E-Ink Display Modulo, ESP32-S3 USB C Con SX-1262 LoRa Support WiFi BLE Meshtastick per Arduino (Con Guscio in Acrilico + Antenna)
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#5

  • 【Facilità di Aggiornamento】: E-Ink LoRa ESP32-S3 dotata di una funzione di aggiornamento dello schermo integrata, permette agli utenti di trascinare e rilasciare immagini BMP per aggiornamenti rapidi e semplici. Il bridge UART USB integrato facilita inoltre lo sviluppo secondario, rendendola ideale per sviluppatori e appassionati.
  • 【Controllo Versatile】: La scheda LoRa 2.13 E-Ink ESP32-S3, dotata del chipset ESP32-S3FN8 + SX1262, offre controllo tramite Wi-Fi, BLE e LoRa, permettendo una connessione versatile e flessibile per vari progetti.
  • 【Display E-Ink ad Alta Qualità】: Equipaggiata con un display E-Ink da 2,13 pollici in bianco e nero con risoluzione 212 x 104 pixel, ideale per una visualizzazione chiara e leggibile, perfetta per tag elettronici e di identità.
  • 【Basso Consumo Energetico】: Progettata per un'operatività a basso consumo energetico, la scheda consuma solo 20 uA in modalità deep sleep e può mantenere la visualizzazione per 180 giorni dopo un'interruzione di corrente, prolungando la durata della batteria.
  • 【Display ad Alto Contrasto】: Il E-Ink display da 2,13 pollici offre un alto contrasto, alta riflessione e un angolo di visione ultra ampio, assicurando una visualizzazione chiara e nitida da qualsiasi angolazione.
  • 27,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 inch E-Paper HAT Display Module, 800 x 480 Resolution, Supports Black/White 2 Colours, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Note: This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32). Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 67,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.3inch ACeP 7-Color E-Paper with Solid Wood Photo Frame, Ultra-Long Standby, 800x480 Resolution, Suitable for Content Displays, Calendars, Paintings, Posters, Batteries Are not Included
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Advanced Color ePaper (ACeP) technology, supports 7-Color display
  • Ultra-low power consumption, basically power is only required for refreshing
  • Onboard power saving circuit, allows thousand times of refreshing by one charge
  • Onboard RTC chip for timing refresh. Simple solid wood photo frame, elegant and beautiful
  • Rotatable stand and hook hanger on the back, not limited to usage scenarios. Open source code, more freedom to customize functions
  • 103,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 13.3inch E Ink Spectra 6 (E6) Full Color E-Paper Display With HAT+ Standard Driver HAT, 1600x1200 Pixels, SPI Communication, E-Ink Display
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • E-Paper Display With HAT+ Standard Driver HAT(Features improved interoperability). Adopts E Ink Spectra 6 (E6) technology, featuring high contrast and high color saturation
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
  • Comes with e-Paper Driver HAT: Features Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi series boards. Onboard voltage translator, compatible with 3.3V / 5V MCUs. Adapting SPI interface for Raspberry Pi/ESP32/STM32, etc
  • Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Can provide with online development resources and manual (e-Paper driver HAT circuit diagram, examples for Raspberry Pi/ESP32/STM32)
  • 362,99 € SU AMAZON
eink display hdmi eink display touch eink touch display eink display raspberry eink display big eink display esp32 esp32 eink display eink display arduino eink display wifi eink color display