main logo

Esp32 S3 Display Touch

I 10 migliori prodotti di agosto 2025
Ultimo aggiornamento: 4 agosto 2025
Waveshare
Waveshare
Waveshare ESP32-S3 2inch Capacitive Touch Display Development Board, 240x320, IPS, 32-Bit LX7 2-Core Processor, Up To 240MHz Frequency, Support WiFi BT, Support OV5640 5MP Camera Module(Included)
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use. Onboard 2inch capacitive touch display for clear color picture display, 240 x 320 resolution, 262K color
  • Built-in ST7789T3 display driver and CST816D capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope).Onboard 3.7V MX1.25 Lithium battery recharge/discharge header. Onboard USB Type-C port for power supply, program downloading, and debugging, more convenient for development use
  • Onboard TF card slot for external TF card storage of pictures or files. Adapting 22 x GPIO pins for flexible configuration of pin function. Onboard camera interface, compatible with mainstream cameras such as OV2640(NOT Included) and OV5640(Included) for image and video acquisition
  • 33,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.47inch Touch Display Development Board(with pinheader), 172x320 Resolution, 262K Display Color, Supports 2.4GHz Wi-Fi/BLE 5, 240MHz LX7 Dual-Core Processor
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • ESP32-S3-Touch-LCD-1.47-M(With black pre-soldered header) uses ESP32-S3R8 chip with 2.4GHz WiFi and BTBLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.47inch IPS display can smoothly run GUI programs such as LVGL
  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (LE), with onboard antenna. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
  • Onboard 1.47inch capacitive touch LCD display, 172x320 resolution, 262K color. Adapting multiple IO interfaces, supports full-speed USB standard
  • Onboard TF card slot for external TF card storage of pictures or files. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2.8inch Capacitive Touch Display Development Board, 240x320, IPS, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi & BT, Onboard Antenna
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT 5 (LE), with onboard antenna. Supports capacitive touch control via I2C interface, 5-point touch with interrupt support
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
  • Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • 37,99 € SU AMAZON
APKLVSR
APKLVSR
APKLVSR Display ESP32, ESP32 S3 Scheda di sviluppo WiFi Bluetooth 4.3'' ESP32 S3 Display touch resistivo ESP32 TN Modulo TFT Touchscreen compatibile con Arduino/LVGL
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • La ESP32-S3 scheda di sviluppo si basa sul controller ESP32-DOWDQ6, una CPU dual-core a basso consumo con una frequenza di clock fino a 240 MHz, che integra periferiche ricche di risorse, SDIO ad alta velocità, SPI, UART e altre funzioni
  • La ESP32 display scheda di sviluppo è un vero strumento di sviluppo IoT con uno schermo controllabile, che può essere utilizzato per il controllo remoto dell'APP, la raccolta di dati ambientali remoti, la fusione di dati remoti, l'impostazione di parametri remoti e altre applicazioni di sviluppo LoT.
  • La ESP32-S3 da 4,3 pollici ESP32 scheda di sviluppo display touch resistivo TN può personalizzare il modulo di controllo e l'interfaccia dell'app, che è molto adatta per creare un'interfaccia dell'app che soddisfi le proprie esigenze
  • Supporto: ① UART/SPI/I2C/PWM/ADC/DAC e altre interfacce ② Fotocamere OV2640, OV7670, flash integrato ③ Caricamento immagini WiFi ④ Scheda TF ⑤ Modalità di sospensione multiple ⑥ Lwip e FreeRTOS integrati ⑦ STA/AP/STA+ Modalità di funzionamento dell'AP ⑧ Smart Config ⑨ Configurazione AirKiss ⑩Sviluppo secondario
  • Applicazione: lo ESP32 display viene schermo utilizzato per applicazioni IoT come trasmissione di immagini di dispositivi domestici intelligenti, monitoraggio wireless, agricoltura intelligente, riconoscimento di codici QR wireless, segnali del sistema di posizionamento wireless, ecc.
  • 30,59 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-Bit LX7 Dual-Core Processor, 368x448, Accelerometer&Gyroscope Sensor, ESP32 With Display, Support 3.7V Li Battery(NOT Included)
Spedizione gratuita
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Equipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory. Type-C connector, improving device compatibility, easier to use
  • Onboard 1.8inch AMOLED display for clear color picture display, 368 x 448 resolution, 16.7M color. Built-in SH8601 display driver and FT3168 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources. Onboard PWR and BOOT programmable buttons for easy custom function development
  • Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc. Onboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery. Onboard 3.7V MX1.25 Lithium battery recharge/discharge header, Support 3.7V Lithium battery(NOT Included)
  • Reserved pads of 7 x GPIO, 1 x I2C, 1 x UART, and 1 x USB interface, for connecting peripherals and debugging. Onboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design
  • Adopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc. Adopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc
  • 41,99 € SU AMAZON
Wonrabai
Wonrabai
ESP32-S3 1.85inch Touch Display Development Board, 360×360 IPS LCD, Dual-Core Processor Up to 240MHz, Audio Codec, Support Offline Speech Recognition and AI Speech Interaction, with 8Ω 2W Speaker
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • ESP32-S3-Touch-LCD-1.85 (with Touch function version) is a microcontroller development board with 2.4GHz W-iFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL.
  • Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.
  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency.
  • Supports 2.4GHz WiFi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna. Built-in 512KB S RAM and 384KB ROM, with onboard 16MB Flash and 8MB P S RAM.
  • Onboard 1.85inch Touch Screen , 360×360 resolution, 262K color. IPS Display Panel, 262K color, 360×360 resolution, wide viewing angle. Adapting UART, I2C and some IO interfaces.
  • 44,15 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 2inch Capacitive Touch Display Development Board 240×320 Pixels 262K Colors IPS Screen Supports WiFi & Bluetooth, Onboard Camera Interface
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • ESP32-S3-Touch-LCD-2 Onboard camera interface and TF card slot
  • Embedded with ST7789T3 Display Driver and CST816D Capacitive Touch Chip
  • Supports ESP-IDF, Arduino IDE.Comprehensive SDK, dev resources, and tutorials to help you easily get started
  • IPS Display Panel.Excellent display performance, 262K color, wide viewing angle
  • Supports OV2640 / 0V5640 and other mainstream cameras. suitable for image capture, video monitoring and other applications to meet different needs
  • 28,87 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 Touch Display 1.9inch LCD Screen, 170x320 262K Colors Development Board, 240MHz LX7 Dual-Core Support 2.4GHz Wi-Fi & BLE 5, Type-C & PICO Pins Interfaces 90° Hardware Rotation
Spedizione gratuita
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • High-Performance Dual-Core Processor – Powered by the ESP32-S3R8 chip with a 240MHz Xtensa 32-bit LX7 dual-core processor, ensuring fast and efficient performance for HMI applications.
  • Wireless Connectivity – Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) with an onboard antenna for seamless wireless communication
  • Ample Memory & Storage – Features 512KB Static RAM, 384KB ROM, 8MB PSRAM, and 16MB Flash, along with a TF card slot for additional storage.
  • Rich Onboard Peripherals – Includes a 1.9-inch LCD (170×320 resolution), a QMI8658 6-axis IMU (accelerometer + gyroscope), and a USB Type-C port for power and debugging.
  • Strong Expandability – Equipped with a Pico-compatible interface, Onboard 3.7V MX1.25 lithium battery charge and discharge interface, and multiple GPIO pins for enhanced compatibility and rapid prototyping. Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 30,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 1.47inch LCD Display Development Board, 72×320, 262K Color, Dual-core Processor Up to 240MHz Frequency, Supports WiFi & BLE 5, with Colorful RGB LED, ESP32 with Display
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BlE 5 (LE), with onboard antenna
  • Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM Onboard 1.47inch LCD display, 172×320 resolution, 262K color
  • Adapting multiple IO interfaces, integrates full-speed USB port Onboard TF card slot for external TF card storage of pictures or files
  • Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios
  • Built-in RGB LED with clear acrylic sandwich panel for cool lighting effects
  • ️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800x480, 5-Point Touch, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Support WiFi, for Esphome/Home Assistant
Spedizione gratuita
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • ESP32-S3-Touch-LCD-4.3 is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch capacitive touch screen can smoothly run GUI programs such as LVGL
  • Supports capacitive touch control via I2C interface, 5-point touch with interrupt support. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
  • Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 BLE, with onboard antenna
  • Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 8MB Flash. Onboard 4.3inch capacitive touch display, 800×480 resolution, 65K color. Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • 43,99 € SU AMAZON
waveshare esp32-s3 touch display display esp32 s3 esp32 display s3 esp32 s3 display esp32-s3 display display touch esp32 esp32 display touch esp32 capacitive touch display display esp32 esp32 display