High Flow Nozzle
I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento:
11 settembre 2025
Bondtech
Bondtech CHT® Coated Brass Nozzle 0,4 mm -1 pcs
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
These are nozzles for High Flow applications
Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
A Nickel coating is applied to our Coated Brass nozzles to provide protection against corrosion, erosion, and abrasion. Nickel coated nozzles have more corrosion resistance and lower coefficient of friction, which allows slicker feeding of material and delays plastic adhesion to the nozzle's surface.
26,99 € SU AMAZON
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.4mm
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
Plated with Non-stick Composite Additive TwinClad XT Plating
The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
The FlowTech CHT nozzle is compatible with all FlowTech hotend models
26,99 € SU AMAZON
Bondtech
Bondtech CHT Vol Coated Brass Nozzle - 0,4 mm -1 pcs
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
These are nozzles for High Flow applications, They are manufactured by Bondtech in-house.
Compatible with 2.85mm filament
Bondtech CHT nozzles split the filament into 3 thinner strands allowing to melt the material from within. In doing so, the material melts faster and higher flow rates can be used.
33,99 € SU AMAZON
E3D
E3D High Flow ObXidian™ HotEnd for Bambu Lab X1/P1 Series - 0.4mm
Spedizione gratuita
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
E3D has applied their E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
Compatibility: The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, X1E, P1S, and P1P
88,22 € SU AMAZON
E3D
E3D Fully Assembled High Flow ObXidian™ HotEnd for Bambu Lab P1 Series - 0.4mm
12% Sconto
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
Bambu Lab's P1 series printers are built for speed. However, the motion system has headroom to be even better. Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
We've applied our E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
122,68 € SU AMAZON
Micro-Swiss
FlowTech CHT High Flow – CM2 Nozzle – 0,80 mm
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Microswiss e Bondtech hanno partner per portare l'ugello CM2 High Flow, punta hardened CM2 all'ecosistema FlowTech. Questo nuovo ugello incorpora la tecnologia CHT proprietaria, appositamente progettato per aumentare il tasso di flusso del filamento.
Il nucleo dell'ugello è realizzato in rame ad alta temperatura e placcato con placcatura in nichel Electroless. Questa speciale lega mantiene la sua resistenza a temperature molto elevate rispetto a una normale lega di rame.
La punta dell'ugello è realizzata in acciaio temprato ad alta velocità M2 e rivestita con uno speciale rivestimento nano-antiaderente WS2.
L'ugello FlowTech, dotato di tecnologia Bondtech CHT, può ottenere una velocità di flusso volumetrica, fino a 50 mm³/sec
La deposizione dello strato uniforme è stata divisa dividendo il filamento in più chambers as it passes through the melt zone. Questo riduce gaps e punti di weak tra gli strati
35,04 € SU AMAZON
E3D
E3D RapidChange Revo™ ObXidian High Flow Nozzle - 0.4mm
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle.
This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.
Revo ObXidian High Flow increases your setup's volumetric flow rate, enabling you to print abrasive materials faster!
E3D
74,00 € SU AMAZON
E3D
E3D Fully Assembled High Flow ObXidian™ HotEnd for Bambu Lab X1 Series - 0.4mm
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
E3D & Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date.
Bambu Lab's P1 series printers are built for speed. However, the motion system has headroom to be even better. Using our patent pending internal nozzle geometry first developed for Revo High Flow, we've managed to increase the volumetric flow rate of the hotend by 60%! That means you can expect more reliable and consistent extrusion at the same speeds or bump up the volumetric flow rate limit in the slicer to utilise the motion systems' capabilities fully.
We've applied our E3DLC coating to the nozzle and heater block, adding even more abrasive resistance for all your fibre-filled fun and a non-stick protective layer to prevent plastic build-up on the Nozzle.
124,03 € SU AMAZON
Microswiss
FlowTech CHT High Flow – CM2 Nozzle – 1,00 mm
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Microswiss e Bondtech hanno partner per portare l'ugello CM2 ad alto flusso, punta hardened CM2 all'ecosistema FlowTech. Questo nuovo ugello incorpora la tecnologia CHT proprietaria, appositamente progettato per aumentare il tasso di flusso del filamento.
Il nucleo dell'ugello è realizzato in rame ad alta temperatura e placcato con placcatura in nichel Electroless. Questa speciale lega mantiene la sua resistenza a temperature molto elevate rispetto a una normale lega di rame.
La punta dell'ugello è realizzata in acciaio temprato ad alta velocità M2 e rivestita con uno speciale rivestimento nano-antiaderente WS2.
L'ugello FlowTech, dotato di tecnologia Bondtech CHT, può ottenere una velocità di flusso volumetrica, fino a 50 mm³/sec
La deposizione dello strato uniforme è stata divisa dividendo il filamento in più chambers as it passes through the melt zone. Questo riduce gaps e punti di weak tra gli strati
35,82 € SU AMAZON
E3D
E3D RapidChange Revo™ ObXidian High Flow Nozzle - 0.6mm
Spedizione gratuita
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle.
This is achieved by pairing a tool steel insert with the new E3DLC coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself resulting in considerably less plastic build up around the Nozzle.
Revo ObXidian High Flow increases your setup's volumetric flow rate, enabling you to print abrasive materials faster!
E3D
77,74 € SU AMAZON
high flow nozzle mk8
high flow
franke high flow
#1 VINCITORE
