main logo

Micro Swiss Ender 3 Nozzle

I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento: 29 giugno 2025
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 74,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss - MK8 Plated Wear Resistant Nozzle 0.4 mm
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating; twinClad XT is a nickel composite coating designed for very low friction
  • Orizzontale 0.4 mm
  • Offre uno dei più bassi coefficienti di attrito, meglio che il nickel con PTFE co-deposito
  • Questo rivestimento è anche molto resistente e resistente all'abrasione; se si lavora con fibra di carbonio abrasiva, acciaio inossidabile, legno pieno o qualsiasi altro filamento metallico, questo migliorerà notevolmente la vita del tuo ugello
  • 22,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.6mm
Spedizione gratuita
star

93

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
  • This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.6mm
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
  • FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
  • 19,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#5

  • The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
  • FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
  • 19,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss - Blocco riscaldante con calzino in silicone per stampanti CR10, Ender 2, Ender 3, ANET A8 MK7, MK8, MK9 Hotends
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Si tratta di un blocco riscaldante in alluminio Micro Swiss con sistema di bloccaggio scanalato per stampanti della famiglia CR-10/Ender e qualsiasi Hotend MK7, MK8, MK9.
  • Dimensioni filettatura: M6
  • Dimensioni del blocco: 20 mm x 20 mm x 10 mm
  • Adatto a: ANET A8, Creality CR-10-S5, Creality CR-10-S4, Creality CR-10S, Creality CR-10 MINI, Ender 2, Ender 3, Ender 5, Ender 6, TronXY X5S, MK7, MK8, MK9
  • 28,10 € SU AMAZON
Micro Swiss
Micro Swiss
Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 3mm - 0,6mm
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Ugello per Ultimaker 2+, E3D, Olsson Block
  • Orizzontale 0.6 mm
  • Si tratta di un ugello in stile RepRap, realizzato in un materiale base in ottone 360 e placcato con rivestimento TwinClad XT; twinClad XT è un rivestimento in composito di nichel progettato per un attrito molto basso
  • Offre uno dei più bassi coefficienti di attrito, meglio che il nickel con PTFE co-deposito
  • Questo rivestimento è anche molto resistente e resistente all'abrasione; se si lavora con fibra di carbonio abrasiva, acciaio inossidabile, legno pieno o qualsiasi altro filamento metallico, questo migliorerà notevolmente la vita del tuo ugello
  • 19,90 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.4mm
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
  • Plated with Non-stick Composite Additive TwinClad XT Plating
  • The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
  • More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
  • The FlowTech CHT nozzle is compatible with all FlowTech hotend models
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.4mm
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ - HighFlow 1.75 Nozzle - 0.4mm  
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,99 € SU AMAZON
micro swiss ender 3 micro swiss ender 3 v2 micro swiss nozzle ender 3 nozzle nozzle ender 3 micro swiss flowtech nozzle