Modulo 5g Raspberry
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
18 giugno 2025
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
Waveshare
Waveshare PCIe To 5G/4G/3G HAT For Raspberry Pi 5, High-Speed, Compatible With 3042/3052 Package SIMCom/Quectel 5G Module, Compatible With Pi/OpenWRT/Windows/Linux Systems, with RM520N-GL 5G Module
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Comes with PCIe TO 5G HAT+, RM520N-GL 5G Module, 5G-4IN1-PCB Antenna
Suitable for Industrial Routers, Home Gateways, Set Top Boxes, Industrial Laptops, Consumer Laptops, Industrial PDAs, Rugged Industrial PCs, And Digital Signage...
Supports 5G/4G/3G Networking: Supports 5G NSA (4G And 5G Co-Networking) And SA (5G Separate Networking); Supports 4G/3G Internet. Connecting To PI5 Via PCIe Interface: Onboard PCIe Connector, Can Be Directly Connected To Raspberry Pi 5 PCIe Interface For 5G Networking Via 16PIN Cable
PCIe MHI Driver Porting: The Pi5 Can Load The Module Via PCIe MHI Driver. Compatible With The Latest RPi OS And OpenWRT System. Connecting To Windows/Linux Host Via USB: Onboard Type-C Port, Supports Connecting To Windows/Linux Host Via USB Cable For 5G Networking, Firmware Updating Or Debugging
5G-4IN1-PCB Antenna: Supports Top And Bottom Mounting, Easy To Install, Good Communication Effect. Onboard Power Monitoring Chip And EEPROM: For Real-Time Monitoring Voltage, Current And Power Of Module Via I2C. Supports Saving HAT+ ID And Product Information, Compatible With HAT+ Standard
314,99 € SU AMAZON
Waveshare
Waveshare RM520N-GL 5G HAT with Case,Compatible with Raspberry Pi/Windows 7/8/10/11, Quad Antennas LTE-A, Global Band, GNSS Positioning, Support 3GPP 16, 4G/3G
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Viene fornito con il modulo Quectel RM520N-GL 5G Sub-6GHz, supporta vari standard di rete come 5G/4G/3G e LTE-A, supporto di posizionamento GNSS. Viene fornito con M.2 TO 4G/5G HAT, compatibile con i moduli 5G serie RM500U-CN/RM500Q-GL/RM502Q-AE/RM520N-GL
Circuito di alimentazione ad alta efficienza, corrente di uscita fino a 3A. Viene fornito con custodia in metallo, supporta il montaggio a parete e su guida, più comodo per l'installazione
Tipologia di prodotto: COMPUTER A SCHEDA SINGOLA
Marca: Waveshare
325,99 € SU AMAZON
Waveshare
Waveshare USB TO M.2 B KEY Module Driver Board for M.2 Interface 4G/5G Module(NOT Included), With Quad Antennas,USB 3.1 Port for Raspberry Pi/PC/Jetson Nano to Achieve High Speed 5G Network
Spedizione gratuita
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules. Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules.
USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network. 4x SMA antenna connectors, easy to install the antenna.
Onboard SIM card slot for NANO SIM card. Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions.
PCB ENIG process, reserved multi slots and positioning holes for integration. Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable.
Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use.
38,99 € SU AMAZON
Waveshare
Waveshare Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4 Compatible with Communication Modules with M.2 B Key Interface
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
Compatible With Communication Modules With M.2 B KEY Interface
Standard CM4 Socket And Color-Coded Raspberry Pi 40PIN GPIO Header
Suitable For Compute Module 4 Lite/EMMC Series Module
Providing Interfaces Including: ETH/CSI/DSI/RTC/HDMI/Micro SD/USB/M.2 B KEY
76,99 € SU AMAZON
TUOPUONE
TUOPUONE PCIe a M.2 4G/5G e USB 3.2 HAT Compatibile con Raspberry Pi 5 Compatibile con moduli SIMCom/Quectel 4G/5G RPi 5 HAT Networking ad alta velocità
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
✨Compatibile con Raspberry Pi 5, design standard HAT+ con EEPROM I2C integrato, e supporta l'espansione impilabile RPi 40PIN GPIO
✨Estende 3 porte USB 3.2 Gen1 ad alta velocità per collegare più periferiche
✨Slot M.2 (NGFF) Key B integrato, supporta moduli 4G/5G serie SIM7600XX-M.2, SIM82XX e RM5XX ed è compatibile con pacchetti 3042/3052
✨ Porta di tipo C integrata per il collegamento a un PC per la rete 4G/5G, il debug e l'aggiornamento del firmware o l'ingresso di alimentazione esterna
✨Chip di monitoraggio della potenza integrato per la misurazione in tempo reale di tensione, corrente e potenza
48,95 € SU AMAZON
Waveshare
Waveshare Industrial Grade Metal Case (D) For Raspberry Pi 5, Larger Internal Space, Supports Installing Official Cooling Fan And Various HATs, Wall-Mount And Rail-Mount Support
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Industrial Metal Case For Raspberry Pi 5 - Rail-Mount And Wall-Mount Support, Larger Internal Space, Supports Installing Various HATs And Expansion Boards
Larger Internal Space - Specifically designed for Raspberry Pi 5, sheet metal process design, large internal capacity, compatible with Raspberry Pi 5 most module/accessories
Precise Cut-Out Design - Each Cut-Out Is Completely Aligned With The Interfaces Of Pi5, With Removable Reserved Holes. It Also Has Reserved Antenna Holes And RF Outlets To Reduce Signal Attenuation Of WiFi And BT Communication
Wall Mount & Rail-Mount Support - More Flexible For Industrial Installation And Use
Supports Installing Various HATs(Not included) - Such as PCIe TO 4G/5G M.2 USB3.2 HAT+, PCIe TO MiniPCIe GbE USB3.2 HAT+, PCIe TO Gigabit ETH USB3.2 HAT+,
15,99 € SU AMAZON
Geekworm
Geekworm X1005 Dual NVMe SSD Shield Bottom for Raspberry Pi 5, supports Hailo-8 AI Accelerator
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Raspberry Pi 5 Dual NVMe Hat only compatible with Raspberry Pi 5, Model: X1005
【Support Dual M2 NVMe SSD with multiple length】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation
【 Raspberry Pi 5 AI Hat Extension】 Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
【 Support NVMe Boot】 Supports NVMe boot with eeprom 2024/05/17 and later version
【How to Power】 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Recommend to use Geekworm PD 27W power adapter (ASIN:B0CP8SRXSC) or (ASIN:B0CZCZF2QV)
【Packing List】1 x X1015 PCIe Peripheral Board, 2x 40mm PCIe FFC Cable(One as backup), 1x GPIO Header, 1x Screws Pack (Note: not include Raspberry Pi 5, SSD, TF card or power adapter.)
【Matching Case (NOT include)】Refer to P580-V2 Case (ASIN: B0D99HVX3C). NOT compatible with P580!
40,00 € SU AMAZON
Waveshare
Waveshare Pi5 Nvme HDMI Case Compatible with Raspberry Pi 5, Comes with PCIE to M.2 Adapter Board, Aluminum Alloy Case, Multi-Functional All-in-One Mini-Computer Kit C
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Pi5 Module BOX-C, Mini-Computer Kit for Raspberry Pi 5, Supports PCIe to M.2 interface
Larger Space, Strong Expandability - Larger Internal Space, Supports Connecting To Various HATs Such As PoE HAT, Etc. Also With Space Left For Cable Management
Comes With Pi5 HDMI And Type-C Adapter - Adapting Type-C, Dual HDMI Female Ports, And Screw Terminal For Easier Connection With Peripherals, Supports Two Power Supply Connection Methods From The Front Side Or The Back Side
Reserved Airflow Vents For Efficient Heat Dissipation - Supports Installing Cooling Fan(NOT included) For Better Heat Dissipation
Dual 4K Output - Supports dual HDMI interfaces and dual 4K video output
37,99 € SU AMAZON
raspberry 5g
modulo 5g
modulo raspberry
modulo raspberry pi
raspberry pi 5g
modulo 5g pc
modulo 5g usb
modulo solare raspberry
raspberry 5g hat
modulo 5g sim
#1 VINCITORE
