Nvme Raspberry Pi3
I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento:
19 settembre 2025
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Mini Adapter, Compatible with Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 from Solid State Drive
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
For reference only, the Raspberry Pi 5 and cooling fan are NOT included, please refer to the Package Content for detailed part list. [Connecting To PI5 Via 16PIN Cable]: Based On 16PIN PCIe Interface Of Raspberry Pi 5
[PCIe To M.2 Mini Adapter]: Designed for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing
[Compact Size Design]: Practical And Compact, Easily Embedded Into Your Projects
[NVMe Drive Protocol Support]: Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 And Gen3 Modes. Supports Booting PI5 From Solid State Drive
[Onboard Dual LED Indicators]: Easy To Monitor The Working Status
13,99 € SU AMAZON
GeeekPi
GeeekPi N16 Quad M.2 M-Key NVMe SSD Peripheral Board for Raspberry Pi 5, Support M.2 NVMe M-key 2230/2242/2260/2280 SSDs
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】N16 Quad M.2 M-Key NVMe SSD Peripheral Board is compatible with Raspberry Pi 5, supports the installation of 4pcs M.2 NVMe M-key 2230/2242/2260/2280 SSDs for high-speed data storage and retrieval.
【Power Delivery Support】It supports from 9V-20V PD and will automatically read the user's power supply PDO.
【Dual-Purpose Power Supply】Powers both the Raspberry Pi 5 and connected storage devices.
【Versatile Form Factor Compatibility】Accommodates M.2 SSDs in sizes 2230, 2242, 2260, and 2280. Ideal for use in Samba file systems or NAS setups, providing a robust disk expansion foundation. Comes with SSD copper pillar for 2230/2242/2260/2280 SSD installation.
【Packing List】1 x N16 PCIe to M2 NVMe Shield, 2 x PCIe FFC cable, 1 x USB-C Power Cable, 1 x Screw driver, 1x Screws Pack
【Wiki】https://wiki.52pi.com/index.php?title=EP-0180
49,99 € SU AMAZON
GeeekPi
GeeekPi Metal Case with N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board for Raspberry Pi 5, Support M.2 NVMe SSD 2230 2242 2260 2280
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】This kit includes a metal case and a N04 M.2 Key-M NVMe SSD PCIe Peripheral Board. It is compatible with the latest Raspberry Pi 5 4GB/8GB and Supports M.2 NVMe SSD 2230 2242 2260 2280. with Active Cooler Kit, ASIN: B0CXP92CHG; with 27W Power Supply Kit, ASIN: B0CXPBQK7F.
【Access to all Ports】GeeekPi Raspberry Pi 5 Case can accurately access most ports of Raspberry Pi board, including usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, and GPIO Slot.
【N04 M.2 NVMe to PCIe Adapter】N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It supports the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra custom CNC SSD mount screw, no soldering required.
【Packing List】1x Metal Case for Raspberry Pi 5, 1x N04 PCIe M.2 Key-M NVMe SSD PCIe Peripheral Board, 4x Copper Heatsinks, 1x FPC Cable, 1x Screwdriver, 1x Screw Pack
【Please Noted】NOT include Raspberry Pi 5 Board, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or Power Adapter.
25,99 € SU AMAZON
Waveshare
POE M.2 HAT+ Scheda di Espansione Combina Power Over Ethernet POE HAT e Adattatore PCIe a M.2 per Raspberry Pi 5, Supporta IEEE 802.3af/at Standard di Rete e M.2 NVME 2230/2242 Dimensioni
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
PCIe to M.2 with PoE HAT designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard, adapter for NVMe protocol M.2 Solid State Drive, high-speed reading/writing
POE M.2 HAT+ expansion board connecting to PI5 via 16PIN cable, based on 16PIN PCIe interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
NVMe Drive Slot support, only supports the NVMe Protocol Solid State Drives, compatible with 2230/2242 Size M.2 Solid State Drive, supports Gen2 and Gen3 modes, supports booting PI5 from Solid State Drive
Power Over Ethernet, providing both network connection and power supply for your Raspberry Pi in one cable. Onboard 5V & 12V header outputs, 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power) be able to power extra devices while providing stable power to Raspberry Pi
Active cooling fan, accelerate cooling effect, more stable performance
34,55 € SU AMAZON
GeeekPi
GeeekPi P31 M.2 NVME M-Key PoE+ HAT con dispositivo di raffreddamento attivo ufficiale per Raspberry Pi 5, supporto SSD M.2 NVMe 2230/2242
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Compatibilità: Compatibile con Raspberry Pi 5
Raffreddamento attivo: Include il dispositivo di raffreddamento attivo ufficiale Raspberry Pi 5
Connessione Ethernet: Dotato di tecnologia di connessione Ethernet
Porta USB: Include 2 porte USB per la connessione di dispositivi esterni
Standard wireless: Supporta lo standard wireless infrared
38,99 € SU AMAZON
Geekworm
Geekworm X1003 PCIe M.2 NVMe SSD PIP PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Compatibility】Only use for Raspberry Pi 5 16GB / 8GB / 4GB ith Raspberry Pi 5 official active cooler; 【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
【How to Power】Can power the X1003 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power) Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1003 PCIe Peripheral Board, 1x Screws Pack Accessories
【Matching Case (NOT included)】Refer to P579 (ASIN: B0CRB3DT5M); Or P579 Case with Active Cooler (ASIN: B0CT4P893Q); Or Argon NEO 5 Case (ASIN: B0CR1JPCM7); Or P425 ABS Case (ASIN: B0CYQ3T5DF); Or Raspberry Pi 5 official ABS case
17,00 € SU AMAZON
Freenove
Freenove Quad M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 4 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Quad M.2 Slots: Install 1 to 4 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module operates only when installed alone and NOT with any SSD on quad-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
29,95 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 256GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 256GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
36,95 € SU AMAZON
raspberry pi3
raspberry pi3+
nvme raspberry
raspberry nvme
custodia raspberry pi3
raspberry pi3 a+
raspberry pi3 dac
raspberry pi3 fan
alimentatore raspberry pi3
raspberry pi3 alimentatore
#1 VINCITORE
