Pi 5 Sata Hat
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
9 ottobre 2025
ODSS
Raspberry Pi 5 Penta SATA HAT, fino a 5 dischi SATA HAT
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Confezione: 1 cappello Penta SATA
Perfettamente supportato da Raspberry Pi serie 5
La soluzione perfetta per server NAS: 4 SATA + 1 interfaccia eSATA
Ulteriori interfacce di espansione: progettato per supportare display OLED e ventola
Opzioni di interfaccia di alimentazione flessibile: interfaccia di alimentazione ATX standard o interfaccia di alimentazione CC 12V
109,83 € SU AMAZON
APBVIHL
Raspberry Pi 5 Penta SATA HAT con Top Board - Fino a 5 dischi SATA HAT
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
La confezione contiene: 1 cappello Penta Sata+tavola superiore
Perfettamente supportato da Raspberry Pi serie 5
La soluzione perfetta per server NAS: 4 Sata + 1 interfaccia eSata
Opzioni di interfaccia di alimentazione flessibile: interfaccia di alimentazione ATX standard o interfaccia di alimentazione CC 12V
Ulteriori interfacce di espansione: progettato per supportare display OLED e ventola
114,20 € SU AMAZON
Waveshare
Waveshare PCIe To 2-Ch SATA Adapter For Raspberry Pi 5, Supports SATA Hard Drive Protocol, Onboard Dual LED Indicators And EEPROM, HAT + Standard, Driver-Free, Plug And Play
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
PCIe TO 2-CH SATA HAT+: Designed For Raspberry Pi 5, Driver-Free, Plug And Play
Connecting To Pi 5 Via 16PIN Cable: Based On 16PIN PCIe Interface Of Raspberry Pi 5
SATA Hard Drive Protocol: Dual-Channel SATA Interfaces, Compliant With SATA Gen3 Standard
PCIe To 2-Ch High-Speed SATA 3.0: Compliant With SATA 3.0 (SATA Gen3) And PCIe Gen2 Standards
SATA Drive Slot Support. Onboard Dual LED Indicators: Easy To Monitor The Working Status. Onboard EEPROM: For Saving HAT ID And Product Information
26,99 € SU AMAZON
Coolwell
PCIe to 2-Channel SATA HAT+ Adapter for Raspberry Pi 5, SATA 3.0 Expansion Board with Dual SATA Ports, LED Indicators, EEPROM, Plug and Play, High-Speed HDD/SSD Storage Support
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
✅ High-Speed PCIe to 2-Port SATA 3.0 Adapter for Raspberry Pi 5: This dual-channel PCIe to SATA HAT+ supports SATA 3.0 (6Gbps) for fast and stable HDD/SSD storage, specially designed for Raspberry Pi 5 via 16PIN PCIe interface.
🔌 Plug and Play SATA Expansion Board, Driver-Free Setup: No driver installation needed—this SATA HAT+ adapter is fully plug-and-play on Rasp-berry Pi 5, allowing for quick setup of external storage with zero hassle.
💡 Onboard Dual LED Indicators for Status Monitoring: Features two status LEDs for each SATA port, making it easy to monitor SATA HDD/SSD activity and system operation at a glance.
📦 Integrated EEPROM for HAT ID and Product Info Storage: The onboard EEPROM stores the HAT+ identity and technical details, ensuring compatibility with the Rasp-berry Pi HAT+ standard and auto-recognition on boot.
🛠️ Compact, Reliable SATA Expansion for Raspberry Pi NAS Projects; Perfect for building your own Rasp-berry Pi NAS, media server, or data backup system—this 2-Port SATA PCIe adapter is compact, efficient, and ideal for DIY storage solutions.
25,91 € SU AMAZON
UeeKKoo
Adattatore PCIe a SATA a 2 canali compatibile con Raspberry Pi 5, SATA 3.0, indicatori a doppio LED integrati e EEPROM, HAT + Standard, senza driver, Plug and Play
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
PCIe TO 2-CH SATA HAT+, compatibile con Raspberry Pi 5, senza driver, plug and play.
Collegamento a Pi 5 tramite cavo 16PIN: basato sull'interfaccia PCIe 16PIN di Raspberry Pi 5.
Protocollo disco rigido SATA: interfacce SATA a doppio canale, compatibile con lo standard SATA Gen3.
PCIe a SATA 3.0 ad alta velocità a 2 canali: conforme agli standard SATA 3.0 (SATA Gen3) e PCIe Gen2.
Indicatori a doppio LED integrati: facile da monitorare lo stato di lavoro. EEPROM integrata: per salvare HAT ID e informazioni sul prodotto.
Viene fornito con risorse di sviluppo online e tutorial per aiutarti a iniziare rapidamente: bit.ly/4nF3h6V
25,91 € SU AMAZON
Wonrabai
POE HAT Board Compatible with Raspberry Pi 5, Power Over Ethernet HAT(POE) with Onboard Cooling Fan and Metal Heatsink, Supports 802.3af/at Network Standard,12V and 5V Power Outputs
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
The PoE HAT (F) is an 802.3af/at-compliant Power Over Ethernet accessory Compatible with Raspberry Pi 5. (Note: Not for PI4B and PI3B). With Standard Pi 40PIN GPIO stackable header, allows connecting other HATs.
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipment, it is possible to provide both network connection and power supply for your RPi in only one Ethernet cable.
Onboard 5V & 12V header outputs: 5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). Be able to power extra devices while providing stable power to RPi.
Onboard with Active Cooling fan: Accelerate Cooling Effect, More Stable Performance
Onboard MP8759GD buck chip: Incorporates original voltage buck chip, providing up to 5A under sufficient heat dissipation condition.
29,75 € SU AMAZON
Wonrabai
Pi5 PoE HAT Board Compatible with Raspberry Pi 5/Compute Module 5, Power Over Ethernet HAT,Offer Network Connection and Power Supply to Pi 5/CM 5 In One Cable, 5V 5A
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT Compatible with Raspberry Pi 5/ Compute Module 5.
By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your RPi 5/ Compute Module 5 in only one Ethernet cable.
PoE capability,IEEE 802.3af/at-compliant. Compatible With RPi 5 Official Case. Standard RPi 40PIN GPIO header, easy to assemble into the official case.
Onboard original IC solution for more stable PoE power performance. Adopts non-isolated switched-mode power supply (SMPS).
Application Example---With this product, you can use an Ethernet cable with PoE function to power the RPi directly.
25,91 € SU AMAZON
Freenove
Freenove Dual M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 2 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 Scheda di espansione HDD/SSD SATA da 2,5 pollici per Raspberry Pi 4 (non include Raspberry Pi o HDD/SSD)
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
35,00 € SU AMAZON
Geekworm
Geekworm NASPi V2.0 2.5 "SATA HDD/SSD NAS Storage Kit per Raspberry Pi 4 Modello B (Non includere Pi 4 o SSD/HDD)
Spedizione gratuita
64
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
65,89 € SU AMAZON
raspberry pi 5 sata hat
pi 5 sata
rpi 5 sata hat
raspberry pi hat sata
raspberry pi sata hat
hat raspberry pi 5
raspberry 5 sata hat
sata hat raspberry 5
sata hat
pi hat