Pimoroni Nvme Base For Raspberry Pi 5: 10 migliori del 2025

▼ Mostra di più▲ Mostra di meno

This expansion board adds one 2.5GBE network port and one M.2 Key-M interface for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces and then through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet and M.2 Key-M NVME.
After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the driver of RTL8125 and then you can use it.
Support M.2 NVMe SSD for expansion and storage, compatible with M.2 KEY-M NVMe SSD in 2230/2242/2260/2280 length. Support boot from SSD, and it needs Raspberry Pi official firmware, which is at least 2024.5.13.
With four M2.5 fixing holes, the concave design on the top of the board is convenient for the operation and use of 40Pin GPIO.
This adapter board is suitable for use with aluminum case. Only for aluminum enclosure, please refer to ZC506 (ASIN: B0F93SQ67G). For ZP593 PCIe Peripheral Board with ZC506 aluminum case, please refer to ZP545 (ASIN: B0F93SQ52B).
26,99 € SU AMAZON

Pimoroni Nvme Base For Raspberry Pi 5

I 10 migliori prodotti di agosto 2025

Ultimo aggiornamento: 4 agosto 2025

Geekworm

Geekworm P580-V2 Case | Support Raspberry Pi 5 & X1005 / X1002 PCIe to M2 NVMe SSD Base & Active Cooler

98

QUALITÀ MASSIMA

Amazon.it

GeeekPi

GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)

98

QUALITÀ MASSIMA

Amazon.it

GeeekPi

GeeekPi Alloggiamento in metallo con scheda periferica N07 M.2 NVMe SSD Pip PCIe per Raspberry Pi 5, supporto M.2 Key-M NVMe SSD 2230/2242/2260/2280

93

QUALITÀ OTTIMA

Amazon.it

GeeekPi

GeeekPi Custodia in metallo con scheda periferica N07 M.2 NVMe SSD Pip PCIe inferiore per Raspberry Pi 5, con dispositivo di raffreddamento attivo ufficiale Raspberry Pi 5, supporto M.2 Key-M NVMe SSD

88

QUALITÀ DISTINTA

Amazon.it

GeeekPi

GeeekPi N07 M.2 PCIe to NVMe Bottom SSD Pip PCIe Peripheral Board for Raspberry Pi 5,Support M.2 Key-M NVMe SSD 2230/2242/2260/2280 (SSD and Pi5 Board are Not Included)

88

QUALITÀ DISTINTA

Amazon.it

Waveshare

Waveshare PCIe to M.2 Mini Adapter, Compatible with Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 from Solid State Drive

80

QUALITÀ BUONA

Amazon.it

Freenove

Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 128GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s

79

QUALITÀ BUONA

Amazon.it

GeeekPi

GeeekPi FFC Cable Set 16Pin 0,5 mm Pitch for Raspberry Pi 5 PCIe to NVMe SSD Shield (40 mm/60 mm/80 mm lunghezza)

76

QUALITÀ BUONA

Amazon.it

ZDE

ZDE ZP593 PCIe to 2.5G Ethernet Network Port PCIe to M.2 Key M NVMe SSD HAT Adapter Expansion Board for Raspberry Pi 5 Support M.2 NVMe 2230 2242 2260 2280 SSD

74

QUALITÀ BUONA

Amazon.it

GeeekPi

GeeekPi P33 M.2 NVME M-Key PoE+ Cappello per Raspberry Pi 5, con ufficiale Raspberry Pi 5 Active Cooler, Supporto M.2 NVMe SSD 2230 2242 2260 2280

70

QUALITÀ BUONA

Amazon.it