main logo

Raspberry Board

I 10 migliori prodotti di agosto 2025
Ultimo aggiornamento: 4 agosto 2025
Freenove
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
  • Pin Name: The BCM numbering name of each pin is printed next to it
  • 11,95 € SU AMAZON
ARCELI
ARCELI
ARCELI RPi GPIO Scheda di espansione Breakout + Cavo a Nastro + Adattatore T Tipo GPIO assemblato 20 cm FC40 Cavo Piatto a Nastro 40pin per Raspberry Pi 3 2 Modello B & B + SC05
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Assemblato RPi GPIO con 8 "Cavo a 40 pin per Raspberry pi 3B, Raspberry pi 2 modello B, Raspberry pi 1B +, Raspberry pi 1A +, Raspberry pi zero W, Raspberry pi zero
  • 1 * GPIO 40P Rainbow Ribbon Cable a 40 pin
  • 1 * GPIO Expansion Board
  • 40 pin sono etichettati per una facile prototipazione
  • GPIO Adapter Plus per Raspberry Pi B +, Raspberry Pi 2, Raspberry Pi NON è incluso
  • 5,99 € SU AMAZON
Geekworm
Geekworm
Geekworm GPIO Extension Header (G341) / 1-to-2 40 Pin GPIO Edge Adapter Board for Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B / Zero W/Zero
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Packing List: 2 * 2x20 Female Header (Pin Len: 12mm), 2 * 2x20 Female Header (Pin Len: 10.7mm), 2 * 2x20 Female Header (Pin Len: 5.5mm), 2 * 2x20 Pin Header
  • The 2x20 Pin Header is for Raspberry Pi Zero / Zero W.
  • Material: Insulated plastic, hard metal pin
  • Application: Widely be used in Raspberry Pi DIY project, such as for electronic circuit, PCB circuit board etc. electronic project
  • Stacking header for Raspberry Pi 5, Raspberry Pi 4, Pi 3, Pi 2, Pi Model B+, Pi A+, Pi Zero, Pi Zero W
  • 11,00 € SU AMAZON
Geekworm
Geekworm
Geekworm GPIO Extension Header (G341) / 1-to-2 40 Pin GPIO Edge Adapter Board for Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B / Zero W/Zero
Spedizione gratuita
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • 【Packing List】1 x GPIO Edge Extension (Model: G341)
  • 【What it is】GPIO edge Adapter Board is a gpio header that leads 1pc 40pin GPIO pins to 2 pcs 40pin GPIO pins. 90 degrees design makes it more convenient to access to GPIO pins
  • 【Structure】1 x Vertical Pin header, 1x Horizontal Pin header, 1x Female GPIO Pin Header
  • 【Compatibility】Compatible with Raspberry Pi 4 / 3 B+ / 3B / 2B / B+ / Pi Zero 2W / Pi Zero W, Tinker Board and other SBCs with 40pin GPIO.
  • 14,00 € SU AMAZON
Freenove
Freenove
Freenove Breakout Board for Raspberry Pi Pico 1 2 W H WH, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
star

83

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Compatible Models: Raspberry Pi Pico / Pico H / Pico W / Pico WH / Pico 2 / Pico 2 W (NOT included in this kit)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of Raspberry Pi Pico, 2.54 mm (0.1 inch) pitch
  • Pin Name: The name of each Pin is printed next to it
  • 14,95 € SU AMAZON
GeeekPi
GeeekPi
GeeekPi Raspberry Pi Micro GPIO Morsettiera Breakout Board Module, Raspberry Pi GPIO Scheda di Espansione Micro Connettore per Raspberry Pi 4B/3B+/3B/2B/Pi Zero/Pi Zero W/Pi Zero 2 W
10% Sconto Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Compatibile con tutte le serie Raspberry Pi: per Raspberry Pi 1 Model B +, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B +, Pi 4 Model B, Pi Zero, Pi Zero-W
  • Tutti i 40 pin di Raspberry Pi vengono trasferiti tramite terminali a vite, il che è comodo per l'accesso via cavo. Non occupa altro spazio, molto comodo quando si fanno circuiti fai da te.
  • Adesivo serigrafato per una facile identificazione
  • La confezione include: 1 x Mini Terminal Breakout Board per Raspberry Pi; 1 x adesivi a colori Silk-Mark; 1 x pannello acrilico; 4 x pilastro in rame M2.5; 6 x vite M2.5; 2 x pilastro in rame a doppio passaggio M2.5 ; 2 x dado; 1 x cacciavite
  • Supporto tecnologico: https: //wiki.52pi.com/index.php/Mini_Terminal_Breakout_Board_For_Raspberry_Pi_SKU: _EP-0141
  • 16,19 € SU AMAZON
Waveshare
Waveshare
Waveshare PCIe to M.2 Adapter Board (E) For Raspberry Pi 5, With Cooling Fan, Compatible With 2242/2230 NVMe Protocol M.2 Solid State Drive, 8Gbps Data Rate, High-Speed Reading/Writing, Pi 5 NVMe
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Compact Size PCIe to M.2 Board (E), Cooling Fan All-in-One Design, Suitable for Raspberry Pi 5. Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, Improves Working Efficiency
  • Matching the Size And Mounting Holes Of Pi 5, Combines A Temperature-Controlled Blower Fan With An Aluminium Heatsink to Accelerate Heat Dissipation
  • Based On 16PIN PCIe Interface Of Pi5. Connecting to PI5 Via 16PIN Cable
  • Compatible With 2242 / 2230 Size M.2 Solid State Drives. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
  • Onboard Dual LED Indicators, Easy to Monitor the Working Status
  • 21,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi Power Relay Board Raspberry Pi Expansion Board Module for Raspberry Pi A+/B+/2B/3B
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Supports Raspberry Pi A+/B+/2B/3B/3B+ High quality relays, loads up to 5A 250V AC or 5A 30V DC
  • High quality relays, loads up to 5A 250V AC or 5A 30V DC
  • Photo coupling isolation, prevent interference from high voltage circuit
  • Onboard LEDs for indicating relays status
  • Relay control jumper, allows to control the relays by custom pins other than the default pins;Comes with development resources, including examples in wiringPi, WebioPi, shell, python, and bcm2835
  • 19,99 € SU AMAZON
Freenove
Freenove
Freenove Universal Breakout Board Compatible with Arduino Nano Micro Raspberry Pi Pico 1 2 W ESP32 ESP8266, Terminal Block Shield HAT with Pin Header, GPIO Status LED, 5 V 3.3 V
Spedizione gratuita
star

73

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Compatible Models: Any board (5 V or 3.3 V) with a pin spacing of 0.1 inch (2.54 mm), width 0.6, 0.7, 0.8, 0.9, 1.0 inch and length up to 2.3 inch (24 pin) (Compatible with Arduino Nano / Micro, Raspberry Pi Pico 1 / 2 (W), ESP32, ESP8266)
  • Power Supply: If using DC input (6~24 V), can provide 5 V and 3.3 V power (DC-DC circuit, up to 3A); otherwise, can use the power of the main board (Need to configure jumper caps, please refer to the tutorial)
  • GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
  • Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
  • Terminal Block and Header: Connect to all pins of the main board, 2.54 mm (0.1 inch) pitch
  • 15,95 € SU AMAZON
Waveshare
Waveshare
Waveshare Mini Base Board (B) Designed For Raspberry Pi Compute Module 5, Onboard EEPROM & Encryption Chip, Suitable For Evaluating The Raspberry Pi CM5 Or Being Integrated Into End Products
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • As the IO board of the Raspberry Pi Compute Module 5, CM5-IO-BASE-B is a baseboard that can be used with the Raspberry Pi Compute Module 5. With powerful features are integrated into a compact design, it is only the size of a bank card. It comes with two USB3.2 Gen1 ports and two USB2.0 ports onboard, making it convenient for users.
  • Type C can be used as a USB SLAVE interface to flash images. The USB ports have a total maximum power output of 2A. Onboard default 2 USB 3.2 Gen1 ports
  • Supports 4 screens to display different contents, adds MIPI DSI driver, regardless of whether a screen is connected, the system will default to connect, the screen will display in split-screen mode (related to the system version)
  • The onboard BOOT button, you can press the BOOT button before powering on, and connect to the computer through Type C to let the device enter the flashing mode
  • Do not plug or unplug any device other than USB and HDMI when the device is powered on. Do not connect other devices when using Type C to flash. Insufficient power supply for burning will cause the device to be unrecognized
  • 34,99 € SU AMAZON
raspberry pi board cnc board raspberry raspberry io board relay board raspberry raspberry cm4 board raspberry pi board fili raspberry pi expansion board raspberry pi cm4io board raspberry pi pico board