Raspberry Gps Hat
I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento:
18 settembre 2025
Waveshare
Waveshare RS485 CAN HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Allows Stable Long Distance Communication
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
CAN function, onboard CAN controller MCP2515 via SPI interface, with transceiver SN65HVD230
RS485 function, controlled via UART, half-duplex communication, with transceiver SP3485
Reserved control pins, allows to work with other control boards
Comes with development resources and manual (examples in wiringPi/python)
19,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
Waveshare
Waveshare L76K GPS HAT For Raspberry Pi, GPS/BeiDou (BDS) / GLONASS/QZSS Support
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
L76K GPS HAT, a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function, built-in low-noise amplifier and sound surface filter, provides a good positioning experience of fast, accurate, high-performance.
Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi / Jetson / RDK series boards. Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS and QZSS
Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity. Built-in SAW Filter for enhanced noise reduction performance
Supports AGNSS. UART communication baudrate: 4800~115200bps (9600bps by default). Onboard BAT holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
4x LEDs for indicating the module operating status. Can provide with online development resources and manual (examples for Raspberry / Jetson / STM32)
32,99 € SU AMAZON
Waveshare
GSM GPRS GNSS Bluetooth HAT Module for Raspberry Pi, SIM868 Quad-Band GPS Tracker Expansion Board Compatible with Arduino, for SMS Call Data Transfer Navigation IoT Projects
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
✅ All-in-One GSM GPRS GNSS Bluetooth Functionality: This HAT module for Rasp-berry Pi supports GSM, GPRS, GNSS (GPS/Glonass/Compass/LBS), and Bluetooth 3.0 connectivity, ideal for wireless IoT, SMS, call, and tracking applications.
🍓 Quad-Band GSM with Data & Voice Capabilities: Supports GSM 850/900/1800/1900MHz bands with features like SMS, phone call, GPRS data transfer, and voice encode/decode, perfect for global cellular communication use cases.
📡 High Precision GPS & GNSS Positioning: Built-in GNSS receiver offers <2.5m horizontal accuracy with fast cold/hot start times, making this GPS module for Raspberry Pi great for real-time navigation and tracking solutions.
🔧 Raspberry Pi & Arduino Compatible Plug-and-Play HAT: Designed with standard 40PIN GPIO for easy integration with Rasp-berry Pi boards, also supports Ar-duino and STM32 via AT commands, ideal for versatile development and prototyping.
🔋 Built-in USB to UART & RTC for Stable Performance: Features onboard CP2102 USB-to-UART converter, SIM card slot, RTC with backup battery, and LED status indicators to ensure robust GSM GPRS GNSS Bluetooth connectivity and reliable operation.
30,00 € SU AMAZON
Waveshare
Waveshare GNSS L1+L5 Dual-Frequency Active Antenna, SMA-J Connector, Support BD/GPS/Galileo/QZSS/IRNSS, for Raspberry Pi Board and GPS HAT
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
GNSS L1+L5 dual frequency active positioning antenna, SMA-J interface, supporting multiple satellite positioning systems
2dBi gain, 3m long, magnetic base, supporting multiple satellite positioning systems such as BD/GPS/Galileo/QZSS/IRNSS
Suitable for smart homes, smart agriculture, and high-precision maps
28,99 € SU AMAZON
Waveshare
Waveshare GSM/GPRS/GNSS Hat Expansion Board, with Low Power Consumption, Based on SIM868, Compatible with Raspberry Pi
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO Extension Header, Supporti Raspberry Pi series Boards, Jetson Nano; Supporto SIM applicazione toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
39,99 € SU AMAZON
Raspberry Pi
M.2 HAT+ pour Raspberry Pi 5
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
W128907668
15,49 € SU AMAZON
UeeKKoo
Cappellino GPS L76K compatibile con Raspberry Pi 5/4B/3B+/3B/Zero W/Zero 2 W/Jetson Nano, supporta sistemi GPS/BeiDou (BDS)/GLONASS/QZSS Multi-GNSS
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Il L76K GPS HAT è un modulo Multi-GNSS (Global Navigation Satellite System), compatibile con schede Raspberry Pi serie 5/4B/3B+/3B/Zero W/Zero 2 W/Jetson/RDK.
Supporta i sistemi GPS, BeiDou (BDS), GLONASS e QZSS, consente il posizionamento multisistema combinato o indipendente singolo sistema. Supporta la funzione AGNSS. Supporta i sistemi Augment. Il sistema di aumento ha lo scopo di migliorare l'accuratezza, l'integrità, l'affidabilità e la disponibilità di posizionamento e navigazione.
Amplificatore a basso rumore integrato (LNA) per una migliore sensibilità di ricezione. Filtro SAW integrato per prestazioni di riduzione del rumore migliorate. Baudrate di comunicazione UART: 4800 ~ 115200 bps (9600 bps per impostazione predefinita).
Supporto batteria integrato, supporta la cella ricaricabile ML1220, per preservare le informazioni sulle effemeridi e gli avviamenti a caldo. Scenari applicativi: tracciamento del veicolo, tracciamento delle risorse, sistemi di sicurezza, PDA industriali, applicazioni GIS, ecc.
Viene fornito con risorse di sviluppo online e tutorial per aiutarti a iniziare rapidamente: bit.ly/44Xwdjj
31,67 € SU AMAZON
Coolwell
L76K GPS HAT Module, Multi-GNSS (GPS BDS GLONASS QZSS) with AGNSS Support, Compatible with for Raspberry Pi, Arduino, Jetson, STM32, 40PIN GPIO, Onboard LNA & SAW Filter
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
✔ Multi-GNSS Support: GPS, BDS, GLONASS, QZSS: This L76K GPS HAT supports multiple global navigation satellite systems including GPS, BeiDou, GLONASS, and QZSS, allowing faster and more accurate positioning for embedded applications.
📡 Compatible with Rasp-berry Pi, Ar-duino, Jetson, STM32: Designed with a 40PIN GPIO header and UART interface, this GPS module is compatible with for Raspberry Pi, Ar-duino, Jetson, and STM32, perfect for IoT, robotics, and tracking projects.
🔋 AGNSS + Onboard Battery for Hot Start: Supports A-GNSS augmentation system for quicker satellite lock, and features an ML1220 rechargeable ba-ttery holder to preserve satellite ephemeris for hot starts and fast reacquisition.
📶 Enhanced Signal Performance with LNA & SAW Filter: Built-in low-noise amplifier (LNA) and SAW filter improve reception sensitivity and noise resistance, ensuring stable signal even in challenging environments.
📚 Open-Source Examples & Status LEDs: Includes online resources and code examples for popular platforms. 4x onboard status LEDs provide visual feedback for module operation, GPS lock, and communication activity.
31,67 € SU AMAZON
Adafruit
Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 - Mini Kit
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Per i modelli Raspberry Pi a +, B + o Pi 2.
GPS funzionalità
Con orologio in tempo reale.
Antenna interna + u. FL Connector
Un prodotto originale Adafruit
72,07 € SU AMAZON
hat raspberry
raspberry hat
gps raspberry
raspberry gps
hat raspberry pi
raspberry pi hat
raspberry hdmi hat
raspberry hifi hat
raspberry ups hat
dac hat raspberry
#1 VINCITORE
