Raspberry Pi 5 Ssd Hat
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
14 dicembre 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
Raspberry Pi
M.2 HAT+ pour Raspberry Pi 5
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
W128907668
20,47 € SU AMAZON
Raspberry Pi
Raspberry Pi Kit SSD (256 GB)
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Conforme alle specifiche Raspberry Pi HAT+
Contiene SSD Raspberry Pi (NVMe da 256 GB o NVMe da 512 GB)
Include intestazione impilabile da 16 mm, distanziatori e viti per il montaggio a Raspberry Pi 5
Temperatura di esercizio da 0°C a 50°C (ambientale)
NVMe da 256 GB - 40k IOPS (letture casuali da 4 kB), 70k IOPS (scritture casuali 4 kB)
NVMe da 512 GB - 50k IOPS (letture casuali 4 kB), 90k IOPS (4 kB scritture casuali)
45,99 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,00 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q;
13,88 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
GeeekPi
GeeekPi N04 Shield SSD per Raspberry Pi 5, M.2 2280 PCIe a NVMe
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
14,99 € SU AMAZON
SUNFOUNDER
SunFounder Scheda SSD PCIe a M.2-HAT M-Key NVMe PCIe 2/3 per Raspberry Pi 5 2/4/8/16GB, supporta SSD M.2-2230/2242/2260/2280 con dissipatore di calore compatibile con touchscreen da 3,5/5/7/10"
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Accelera Raspberry Pi 5 con velocità NVMe: progettato per Raspberry Pi 5 2GB/4GB/8GB/16GB, questo adattatore SSD M.2 NVMe compatto supporta SSD M-Key 2230/2242/2260/2280. Goditi le prestazioni veloci di PCIe Gen 2.0 (fino a 500 MB/s) e Gen 3.0 opzionale (fino a 850 MB/s). Facile da installare, senza blocco GPIO o ventola di raffreddamento. Include quattro dimensioni di dissipatori di calore SSD per una migliore dissipazione del calore. Con LED di stato e alimentazione per la visualizzazione dell'attività in tempo reale
Avvio più veloce con NVMe SSD: avvia il tuo Raspberry Pi 5 in soli 6-8 secondi con un SSD NVMe rispetto a 25-30 secondi con una scheda microSD. Goditi prestazioni più elevate e un funzionamento più fluido
Design compatto, piena compatibilità: questa scheda NVMe sottile si adatta perfettamente alle configurazioni Raspberry Pi 5, senza bloccare i pin GPIO, il dispositivo di raffreddamento attivo o altri HAT. Lascia spazio per un flusso d'aria sufficiente e funziona perfettamente con display touch Raspberry Pi da 3,5", 5", 7" e 10". Aumenta la velocità senza sacrificare l'estensibilità
Più velocità, più possibilità: con un SSD NVMe, il tuo Raspberry Pi 5 diventa un mini PC più veloce e potente. Ideale per creare un NAS personale, per progetti di intelligenza artificiale con acceleratori, programmazione e sviluppo, automazione domestica, media center o dispositivi portatili touch screen. Scatena la potenza per tutte le tue idee Raspberry Pi
Avvio veloce e prestazioni senza problemi: viene fornito con una guida all'installazione passo passo e tutorial online, così anche i principianti Raspberry Pi 5 possono facilmente configurare e iniziare da NVMe. Include dissipatori di calore per SSD di tutte le dimensioni (2230/2242/2260/2280) per un raffreddamento ottimale e prestazioni stabili
12,70 € SU AMAZON
Freenove
Freenove Dual M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 2 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € SU AMAZON
#1 VINCITORE
