Raspberry Pi Pci Express
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
14 dicembre 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
GeeekPi
GeeekPi Scheda adattatore di estensione slot PCIe P02 per Raspberry Pi 5
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
GeeekPi Scheda adattatore di estensione slot PCIe P02 per Raspberry Pi 5
25,99 € SU AMAZON
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
27,99 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
85
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
Coolwell
PCIe to 4-Channel PCIe HAT Adapter for Raspberry Pi 5, PCIe Expansion Board with 16PIN Cable, Supports Multi-HAT Stacking, Gen2 Interface, Flexible PCIe HAT Configuration
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
✅ Expand Rasp-berry Pi 5 with 4 PCIe Channels: This PCIe HAT adapter expands the single PCIe interface on Rasp-berry Pi 5 into 4 PCIe FFC connectors, ideal for running multiple PCIe devices simultaneously.
🔌 Flexible Multi-HAT Stacking for PCIe Expansion: Supports the stacking of multiple PCIe HATs for Raspberry Pi 5, allowing you to customize your system with SSDs, network cards, capture devices, and more.
⚡ High-Speed PCIe Gen2 Transmission Interface: Compliant with PCIe Gen2 (2.0) standard, this adapter ensures stable and efficient bandwidth for all connected devices, perfect for high-speed peripherals.
🔧 Plug-and-Play PCIe Expansion Board with 16PIN Interface: Easily connects to the 16PIN PCIe port of the Rasp-berry Pi 5 using a flat cable (included), providing immediate access to four independent PCIe slots.
📦 Compact PCIe HAT Adapter for Raspberry Pi DIY Projects: A compact and efficient solution for DIY developers, makers, and engineers seeking to build modular PCIe systems on Rasp-berry Pi 5, such as NAS, AI accelerators, and more.
29,75 € SU AMAZON
ZDE
ZDE Cavo piatto flessibile PCIe FPC da 30 mm, 16 pin, passo 0,5 mm, compatibile con Raspberry Pi 5 PCIe a M.2 Key M NVMe SSD, scheda periferica PCIe, 2 pezzi
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Il cavo PCIe FPC è perfettamente compatibile con Raspberry Pi 5, supporta tutti i tipi di adattatori SSD PCIe a M.2 Key-M NVMe.
Specifiche: Numero pin: 16 pin; Passo: 0,5 mm.
Nota: si prega di prestare attenzione alla direzione del cavo durante l'installazione. E ci sono lettere "RPi5" e "HAT" stampate sul cavo per aiutarti a installarlo correttamente. "RPi5" si collega a Raspberry Pi 5 e "HAT" si collega a HAT o scheda di espansione.
Ogni estremità del cavo è rinforzata con un rinforzo per facilitare l'inserimento.
Il pacchetto include: 2 x 30mm PCIe FPC Cable
6,99 € SU AMAZON
Waveshare
PCIe TO Gigabit RJ45 Ethernet Adapter Board (C) for Raspberry Pi 5,Supports Raspberry Pi OS,10/100/1000Mbps Network Standard,PICe x1 GEN2 Mode
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
PCIe TO Gigabit ETH Board (C) Designed for Raspberry Pi 5
Supports Raspberry Pi OS, Driver-Free, Plug And Play
Connecting To PI5 Via 16PIN Cable,Based On 16PIN PCIe Interface Of Raspberry Pi 5
High-Performance Controller.Onboard Original High-Performance RTL8111H Chip,
Comes With Transparent Acrylic Mounting Plate,Adopts Side-Mounting Solution To Save Space Above The Raspberry Pi 5
13,79 € SU AMAZON
GeeekPi
GeeekPi FFC Cable Set 16Pin 0,5 mm Pitch for Raspberry Pi 5 PCIe to NVMe SSD Shield (40 mm/60 mm/80 mm lunghezza)
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
GeeekPi FFC Cable Set 16Pin 0,5 mm Pitch for Raspberry Pi 5 PCIe to NVMe SSD Shield (40 mm/60 mm/80 mm lunghezza)
9,99 € SU AMAZON
GeeekPi
GeeekPi N04 Shield SSD per Raspberry Pi 5, M.2 2280 PCIe a NVMe
67
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
14,99 € SU AMAZON
#1 VINCITORE
