Raspberry Pi To Nas
I 10 migliori prodotti di maggio 2025
Ultimo aggiornamento:
1 maggio 2025
Geekworm
Geekworm NASPi V2.0 2.5 "SATA HDD/SSD NAS Storage Kit per Raspberry Pi 4 Modello B (Non includere Pi 4 o SSD/HDD)
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
65,89 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0CTDPVNR6), or P580-V2 (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,46 € SU AMAZON
GeeekPi
GeeekPi N16 Quad M.2 M-Key NVMe SSD Peripheral Board for Raspberry Pi 5, Support M.2 NVMe M-key 2230/2242/2260/2280 SSDs
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】N16 Quad M.2 M-Key NVMe SSD Peripheral Board is compatible with Raspberry Pi 5, supports the installation of 4pcs M.2 NVMe M-key 2230/2242/2260/2280 SSDs for high-speed data storage and retrieval.
【Power Delivery Support】It supports from 9V-20V PD and will automatically read the user's power supply PDO.
【Dual-Purpose Power Supply】Powers both the Raspberry Pi 5 and connected storage devices.
【Versatile Form Factor Compatibility】Accommodates M.2 SSDs in sizes 2230, 2242, 2260, and 2280. Ideal for use in Samba file systems or NAS setups, providing a robust disk expansion foundation. Comes with SSD copper pillar for 2230/2242/2260/2280 SSD installation.
【Packing List】1 x N16 PCIe to M2 NVMe Shield, 2 x PCIe FFC cable, 1 x USB-C Power Cable, 1 x Screw driver, 1x Screws Pack
【Wiki】https://wiki.52pi.com/index.php?title=EP-0180
52,99 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Aluminum NAS Case with PWM Fan and M.2 SATA SSD Adapter Board,Raspberry Pi 4 Passive Aluminum Case with 3510 Ultra-Quiet Cooling Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4 Model B --- This aluminum Case contains an Armor Lite Aluminum Heatsink and an M.2 SATA SSD expansion board,is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version.
The Case With High quality aluminium material --- sturdy and durable,It can protect the Raspberry Pi well and keep your Raspberry Pi 4 free from scratches, dust and damage.
With an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi
Good Heat Dissipation Effect --- With 3510 Ultra-Quiet Cooling Fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly. Different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS.
We strongly recommend using the official Raspberry Pi operating system, which can directly configure the fan to adjust the speed according to the CPU temperature through the raspi-config command.Other operating systems may require you to write software yourself and send PWM signals to the fan through GPIO pins to control fan’s speed.
Package Includes: 1x Aluminum Case,1x 3510 Ultra-Quiet Cooling Fan,1x M.2 SATA SSD Expansion Board (Note:Raspberry Pi is Not Included!)
Technology support: wiki.52pi.com/index.php?title=ZP-0140
45,99 € SU AMAZON
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
36,89 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi Mini Tower NAS Kit,Raspberry Pi ICE Tower Cooler with PWM RGB Fan,M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B 8GB/4GB/2GB/1GB
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Il kit GeeekPi Raspberry Pi Mini Tower NAS è la soluzione ideale per trasformare il tuo Raspberry Pi 4 Model B in un mini-host mobile. è compatibile con Raspberry Pi 4 Modello B 1GB/2GB/4GB/8GB.
Questo kit Mini Tower contiene una scheda di espansione SSD SATA M.2 che può espandere l'archiviazione di massa per il tuo Raspberry Pi. Con materiale ABS di alta qualità e stile desktop, può fornire un alloggiamento resistente e durevole per il tuo Raspberry Pi. Ha uno stile desktop unico, che lo rende l'aggiunta perfetta al tuo spazio di lavoro e aiuta a mantenere il tuo Raspberry Pi alla ricerca Freddo.
Include un dispositivo di raffreddamento a torre Raspberry Pi ICE con ventola a velocità regolabile del segnale PWM per mantenere fresco il tuo Raspberry Pi fornendo prestazioni ottimali.
Con display OLED da 0,96 pollici (già montato sulla custodia) - Programmando l'OLED, il contenuto che può essere visualizzato è variabile, come la visualizzazione dell'indirizzo IP del Raspberry Pi, la temperatura della CPU, l'utilizzo del disco, il carico della CPU, lo stato della memoria, traffico della scheda di rete e altre informazioni di sistema e puoi anche modificare le tue esigenze attraverso la tua personalizzazione, il contenuto visualizzato ha un grado di libertà molto elevato.
NOTA: la luce RGB nella ventola e la luce d'atmosfera non si accendono a meno che il driver non sia installato e l'OLED non visualizzerà alcuna informazione fino a quando non lo avrai abilitato !!! Si prega di leggere attentamente il manuale e seguire i passaggi per abilitarlo. Si prega di controllare il nostro wiki per il supporto: https://wiki.52pi.com/index.php?title=ZP-0130-4wire
Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual (NOTE: Raspberry Pi 4B and M.2 SATA SSD drive are not included in the package, require additional purchase. Please pay attention to the type of your SSD drive, it must be M.2 SATA SSD 2280, The adapter board does not support NVME SSD.)
In caso di domande sul prodotto, non esitate a contattarci.
49,99 € SU AMAZON
SUNFOUNDER
SUNFOUNDER NAS Kit for Raspberry pi 4B 3B+ 3B 3A+ 2B, NAS Hat, Dual fan, Micro SD card Included
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Powerful Raspberry NAS kit - A customizable NAS Kit designs for Raspberry Pi which focus on providing a bigger Network attached storage for Raspberry Pi (Compatible with RPi 4B/3B+/3B/3A+/2B, Raspberry Pi is NOT included). This NAS kit is best for Raspberry hobbyist to expand the functions of Raspberry Pi for various creating experiments.
NAS Hat -The E-Ink screen makes it more power-efficient and provides you with a good visual experience, which is used to display Raspberry Pi's CPU temperature, CPU usage, disk usage, fan power, etc.
Abundant Expandability - You can add one more hard drive by simply adding the nylon standoff and acrylic board . The OpenMediaVault includes services such as SSH, (S)FTP, SMB/CIFS, DAAP media servers, RSync, BitTorrent clients, and more functions can be DIY by yourself.
Easy to Use - Simple product composition,accessories with corresponding numbers,and detailed tutorial makes it easy to set up.
Good Heat Dissipation - Dual fans and heat sinks installed ,working automatically when the CPU temperature exceeds 54 degrees,quickly and effectively solving the heating problem of Raspberry pi motherboard.
56,99 € SU AMAZON
Raspberry Pi
Raspberry Pi Zero 2 W
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
1 GHz Quad-Core 64 bit Arm Cortex-A53 CPU
SDRAM da 512 MB
2,4 GHz 802.11 b/g/n Wireless LAN
Bluetooth 4.2, Bluetooth Low Energy (BLE), antenna a bordo
Mini porta HDMI e micro USB On-The-Go (OTG). Slot per scheda microSD. Alimentazione micro USB
39,90 € SU AMAZON
GeeekPi
GeeekPi DeskPi Lite NAS Case Kit,Raspberry Pi 4 NAS Case with M.2 SATA SSD Expansion Board,Built in Raspberry Pi 4 Heatsink with Ultra-Quiet PWM Fan for Raspberry Pi 4 Model B 2GB 4GB 8GB
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Materiale ABS di alta qualità The DeskPi Lite NAS features a sturdy ABS (Acrilonitrile butadiene Styrene) case that provides durability and protection for your M.2 SATA SSD expansion board and other internal components. ABS è noto per la sua stenza e impatto, rendendolo un materiale ideale per questo tipo di custodia.
Equipped with M.2 SATA SSD Expansion Board The case is designed with an integrated M.2 SATA SSD expansion board, allowing you to easily install and securely mount an M.2 SATA SSD. Questa scheda di espansione fornisce capacità di archiviazione aggiuntiva per il tuo NAS setup, migliorando la sua versatilità e prestazioni.
Built in PWM Signal Controlled Fan The cooling heatsink is companied by a PWM (Pulse Width Modulation) signal controlled fan. Questo fan è capace di regolare dinamicamente la sua velocità rotazionale basata su temperature requirements. Monitorando la temperatura del sistema, il fan può aumentare automaticamente o decrease its speed to provide effective cooling while minimizing noise levels.
Better Cooling System To Mantain optimale operating Temperatures for the M.2 SATA SSD and other components, the DeskPi Lite NAS incorporates a cooling heatsink. Il heatsink efficiently dissipates heat generated during extended operation, preventing overheating and ensuring the reliable performance of your NAS system.The combination of the cooling heatsinks and the PWM signal controlled fan ensures efficient airflow within the case.
Easy Installation The DeskPi Lite NAS è progettato per l'installazione straightforward. Tipically includes all the necessary mounting hardware and connectors, making it easy to assembly and integrated with your existing NAS setup..Easy Access to All Ports It can be access to all ports. The customized aluminum alloy radiator with edge expansion board allows to easily access the GPIO interface. The rubber dust cover prevents the GPIO from falling into dust..Technical Support _lite_nas_case/.
54,58 € SU AMAZON
Raspberry Pi
Raspberry Pi 5 8GB Quad-Core ARMA76 (64 Bits - 2,4 GHz)
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Processore quad-core ARMA76 (64 bit - 2,4 GHz) °GPU VideoCore VII 800 MHz integrata °Prestazioni da 2 a 3 volte superiori rispetto alla versione 4
Resa grafica notevolmente migliorata ° Micro-SD ad alta velocità ° Visualizza 2x 4K-60 fps contemporaneamente
2x USB 3.0 5GBps ° 2 connettori MIPI DSI/CSI a 4 vie
Nuove caratteristiche : ¤ Tasto ON/OFF ¤ Porta PCIe 2.0 ¤ Connettore RTC integrato
Modifica : ^ Alimentazione CC 5 V/5 A tramite USB-C ^ Ventola altamente raccomandata per Pi5"
97,80 € SU AMAZON
nas raspberry pi
raspberry pi nas
nas storage raspberry pi
nas raspberry pi 4
nas raspberry pi 5
raspberry pi 4 nas
raspberry pi 5 nas
raspberry pi nas hat
case nas raspberry pi
nas raspberry pi 3
#1 VINCITORE
