main logo

Raspberry Power Hat

I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento: 21 settembre 2025
Waveshare
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
  • 【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
  • 【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
  • 【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
  • 【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is not included)
Spedizione gratuita
star

97

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Alimenta il tuo Pi Zero senza problemi dalla connessione di alimentazione o dalle batterie di riserva
  • Supporta la ricarica e l'uscita regolata da 5 V allo stesso tempo, monitoraggio I2C
  • Perni pogo a molla integrati per il collegamento con schede Raspberry Pi serie Zero. Chip di ricarica della batteria Li-Po, con gestione dinamica del percorso, alimentazione più stabile
  • Chip di aumento della tensione, che fornisce un'uscita di potenza regolata da 5 V. Comunicazione bus I2C, monitoraggio della tensione della batteria, corrente, potenza e capacità residua in tempo reale
  • Multi circuiti di protezione della batteria: protezione da sovraccarico/scarica, protezione da sovracorrente e protezione da cortocircuito, più sicuro e stabile. Indicatore di ricarica per monitorare lo stato di funzionamento della batteria. Viene fornito con risorse di sviluppo e manuale
  • 28,99 € SU AMAZON
Waveshare
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
  • Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
  • Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
  • Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
  • Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
  • 44,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
POE HAT (F) for Raspberry Pi 5, 802.3af/at-compliant, Power Over Ethernet HAT Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
  • By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
  • PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant.x
  • Fully isolated switched-mode power supply (SMPS)
  • Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
  • 29,90 € SU AMAZON
DSLRKIT
DSLRKIT
DSLRKIT Power Over Ethernet Poe Hat IEEE802.3af DC 5V 2.5A with 1.5KV Isolation for Raspberry Pi 4 4B 3B+ 3B Plus
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
  • Support 48V~57V Passive Power Over Ethernet PoE Switch; Support 48V~57V Passive Power Over Ethernet PoE injector
  • Maximum.12Watt DC5V 2.5A
  • With 1.5KV isolation
  • Compatible unsolicited Passive PoE switch
  • 11,90 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
  • 33,95 € SU AMAZON
Waveshare
Waveshare
Waveshare PoE HAT (C) For Raspberry Pi 3B+/4B, 802.3af/at Power-Sourcing Equipment Required
Spedizione gratuita
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • PoE HAT (C) is a 802.3af/at-compliant Power Over Ethernet accessory(with Standard Pi 40PIN GPIO Header) for the Raspberry Pi 3B+/4B
  • By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Pi in only one Ethernet cable. Fully isolated switched-mode power supply (SMPS)
  • While providing stable power for Raspberry Pi, there's also a USB-A port for powering extra external device
  • Onboard high speed active cooling fan, better heat dissipation
  • 24,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4-ch Current/Voltage/Power Monitor HAT for Raspberry Pi I2C/SMBus Interface
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • 4-ch monitoring, via I2C/SMBus interface. Onboard 0.1Ω 1％ sampling resistor, allows measuring bi-directional current up to 3.2A.
  • Embedded 12-bit ADC, supports multiple successive converting, 0~26V voltage measuring range.
  • Directly calculate and output measured power value through additional multiply register. I2C control pins for connecting with other host boards.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
  • 27,99 € SU AMAZON
ZDE
ZDE
ZDE ZP580 PoE+ HAT for Raspberry Pi 5 Power Over Ethernet HAT Adapter Board Supports 802.3af/at Network Standard with Onboard Cooling Fan
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • La scheda PoE HAT è una scheda di espansione Power Over Ethernet (POE) 802.3af/at-compliant per il Raspberry Pi 5. Con teste impilabili Pi 40PIN GPIO standard, permette di collegare altri HAT e periferiche.
  • Adatto per l'uso con un router o switch PoE che supporta lo standard di rete IEEE 802.3af/at. Fornire sia la connessione di rete che l'alimentazione per il vostro Raspberry Pi in un solo cavo Ethernet.
  • Equipped with an onboard active cooling fan for better heatsink and more stable operation performance. Se non hai bisogno di usare il ventilatore di raffreddamento, puoi anche smontarlo.
  • Con uscite di intestazione da 5 V e 12 V. L'intestazione da 5 V fornisce fino a 4,5 A in uscita (massimo 25 W per potenza totale in uscita 12 V + 5 V). Può alimentare dispositivi extra mentre fornisce una potenza stabile al Raspberry Pi.
  • Chip buck integrato: chip di tensione originale incorporato, fornisce fino a 5 A sotto una sufficiente dissipazione del calore.
  • Suitable for use with aluminum case kit, please refer to model ZC501 (ASIN: B0DSZYLMSS).
  • 24,99 € SU AMAZON
lora hat raspberry raspberry battery hat raspberry hat battery raspberry hat sata raspberry hdmi hat raspberry lora hat raspberry sata hat ecoflow power hat raspberry hifi hat dac hat raspberry