main logo

Three Screen Display

I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento: 14 dicembre 2025
Waveshare
Waveshare
Tri-color 1.54 Inch E-Ink Display Module Three-color Resolution 200x200 3.3v E-paper Electronic Screen Panel with Embedded Controller SPI Interface Support for Raspberry Pi/STM32/Nucleo/Jetson Nano
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display
  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with controller boards like Raspberry Pi/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing;Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Download link: www.waveshare.com/wiki/1.54inch_e-Paper_Module_(B)
  • 19,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) 296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • 1,54 pollici, 200 x 200 risoluzione, con controller integrato, comunicazione tramite interfaccia SPI, supporti rosso, nero, e bianco three-color display
  • Nota:Versione 2 please use corresponding demo code
  • A causa dei vantaggi come ultra low power consumption, ampio angolo di visualizzazione, grande effetto sotto il sole, è una scelta ideale per applicazioni come etichetta industriale, strumento industriale e così on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
  • 19,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module(B) Kit 400x300 Resolution Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi/Jetson Nano/Arduino/STM32 via SPI Interface
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • 45,99 € SU AMAZON
Waveshare
Waveshare
Tri-color 2.13 Inch E-Ink Display Module Three-color Resolution 212x104 3.3v E-paper Electronic Screen Panel with Embedded Controller SPI Interface Support Raspberry Pi/Arduino/STM32/Jetson Nano
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing; Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), download link: www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)
  • 23,99 € SU AMAZON
Waveshare
Waveshare
RP2350 MCU Board with 1.28 Inch Round LCD Display Module 240 x 240 Resolution 65K Colours IPS Screen Based on Raspberry Pi RP2350, 6-axis Sensor,USB Type-C Connector
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • RP2350 MCU Board with 1.28inch LCD Based on Raspberry Pi RP2350
  • C/C++, MicroPython support,Comprehensive SDK, dev resources, tutorials to help you easily get started
  • dual-core, dual-architecture.The unique dual-core, dual-architecture capability of RP2350 allows users to choose between a pair of industry-standard Arm Cortex-M33 cores, and a pair of open-hardware Hazard3 cores, giving developers a chance to experiment with the RISC-V architecture in a stable, well-supported environment
  • 30 × multi-function GPIO pins.configurable pin function, allows flexible development and integration
  • A six-axis sensor (three-axis accelerometer and three-axis gyroscope)
  • 19,19 € SU AMAZON
Wonrabai
Wonrabai
2inch LCD Display Module Compatible with Raspberry Pi 5/4B/3B/Pi3B/ Pi Zero 2W/Zero W/Pi Zero 2W/ Zero 2WH, IPS Screen 240x320 Resolution, 262K Display Color,ST7789VW Driver Chip SPI Interface
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • This is 2inch LCD Display Module, 240×320 resolution, 262K colors, clear and colorful displaying effect
  • Embedded ST7789VW driver chip. SPI Interface, Compatible with Raspberry Pi/with Ardui/ STM32, etc.
  • As a 2-inch IPS display module with a resolution of 240 * 320, it uses an SPI interface for communication. The LCD has an internal controller with basic functions, which can be used to draw points, lines, circles, and rectangles, and display English, Chinese as well as pictures.
  • The LCD supports 12-bit, 16-bit, and 18-bit input color formats per pixel, namely RGB444, RGB565, and RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format.
  • For most LCD controllers, the communication mode of the controller can be configured, usually with an 8080 parallel interface, three-wire SPI, four-wire SPI, and other communication methods. This LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.
  • 16,31 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9Inch E-Paper Display Module(B) 296x128 Resolution 3.3v/5v E-Ink Electronic Paper Screen,Red Black White Three-Color Display for Raspberry Pi/Jetson Nano/Arduino/STM32
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 27,99 € SU AMAZON
SEENGREAT
SEENGREAT
SeenGreat 2,13 pollici E-Ink Display HAT Three Color Red White Black E-Paper Screen for Raspberry Pi/Jetson Nano/Arduino/STM32 SPI Interface 250 x 122 risoluzione
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • 250 x 122, display e-ink da 2,13 pollici per Raspberry pi, può visualizzare tre colori: rosso, nero e bianco
  • Display E-paper per Raspberry Pi, interfaccia SPI, senza occupazione pin
  • Il display E-ink è compatibile con Raspberry Pi, trasformatore di tensione a bordo, compatibile con MCU da 3,3 V e 5 V
  • Display E-ink da 2,13 pollici per Raspberry Pi, basato su design per Raspberry Pi 40 PIN GPIO, compatibile con la scheda madre Raspberry Pi Series
  • L'interfaccia di comunicazione SPI è riservata per facilitare la connessione a Arduino/STM32 e altre schede di controllo; codici demo open source disponibili per schede di sviluppo Raspberry Pi/Arduino Mega/STM32/ESP32
  • 23,95 € SU AMAZON
Waveshare
Waveshare
1.3 Inch IPS LCD HAT Display for Raspberry Pi 5/4B/3B+/Zero, 240x240 SPI Screen with Joystick & Buttons, ST7789 Driver, Compatible with Raspberry Pi GPIO
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 📺 Compact IPS LCD Display for Raspberry Pi 5: This 1.3-inch LCD HAT offers a 240x240 IPS display with rich 65K color and wide viewing angle, perfect for portable Rasp-berry Pi 5 projects and interactive applications.
  • 🔌 GPIO-Compatible with Raspberry Pi 5/4B/3B+/Zero: Designed with a standard 40PIN GPIO header, this LCD display is compatible with Raspberry Pi 5, Pi 4B, Pi 3B+, and Zero series boards for easy integration.
  • 🎮 Interactive Joystick & Button Controls: Built-in joystick and three buttons allow direct interaction, making this display ideal for mini gaming systems, control menus, or embedded HMI with your Rasp-berry Pi 5.
  • ⚙️ SPI Interface with ST7789 Driver for Fast Display Response: Using SPI communication and an onboard ST7789 driver chip, this 1.3-inch screen ensures fast, stable data transmission and smooth visual rendering.
  • 🧰 Includes Development Resources for Raspberry Pi 5: Comes with example code and setup documentation tailored for Raspberry Pi 5 and other models, making development easy for hobbyists, engineers, and students.
  • 20,15 € SU AMAZON
Waveshare
Waveshare
Waveshare 12.48inch E-Ink Display Module 1304×984 Resolution with Embedded Controller SPI Interface Red/Black/White Three-Color E-Paper Display Screen
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards. ESP32 control header, allows directly plugging control boards like e-Paper ESP32 Driver Board / ESP32-DevKitC.
  • SPI control interface, for working with STM32 or other MCU host boards. Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • Acrylic protective case, keeping the screen safe, nice looking. Comes with development resources and manual (examples for Raspberry P/STM32/ESP32).
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 248,99 € SU AMAZON