Ups Per Raspberry Pi 4
I 10 migliori prodotti di agosto 2025
Ultimo aggiornamento:
4 agosto 2025
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
Waveshare
Waveshare UPS HAT (E) for Raspberry Pi 5/4B/3B+, Supports 4× 21700 Li Batteries (NOT Included), Bi-Directional Fast Charging, 5V 6A Output, Pogo Pins Connector
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
The UPS HAT (E) is an uninterruptible power supply (UPS) expansion board specially designed for Raspberry Pi series. Onboard battery fuel gauge IC, fast charging chip and high-power buck chip to realize higher power input and output. Supports monitoring the operating state of the HAT via the I2C interface.
Adopts pogo pins connector design, compatible with Raspberry Pi 5 / 4B / 3B+. Supports displaying battery level on the system, easy to check the operating state of the HAT
Onboard Type-C port with bi-directional fast charging, supports multiple charging input / output protocols such as PD3.0, up to 40W charging power. Onboard high-power buck chip for stable 5V 6A power output
Onboard battery fuel gauge IC for reading battery voltage, current, power, remaining capacity and other parameters. Onboard MCU management, supports detecting power connection and booting the Pi
Supports I2C bus communication for monitoring the operating status of Type-C port and batteries in real time. Supports 4× 21700 Li batteries (NOT included), larger capacity and longer battery life. Can provide with online development resources and manual
44,99 € SU AMAZON
GeeekPi
GeeekPi Kit mini torre UPS, Raspberry Pi 4 custodia con dispositivo di raffreddamento ICE Tower, ventola di raffreddamento RGB, display OLED da 0,95 pollici e UPS Plus per Raspberry Pi 4 modello B
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Supporta solo Raspberry Pi 4 Modello B; Supporta display OLED, integrazione UPS Plus, integrazione ICE Tower Cooler.
Lo schermo OLED da 0,96 pollici era già montato sulla custodia. Può visualizzare lo stato di esecuzione di Raspberry Pi o UPS Plus attraverso la programmazione, come l'indirizzo IP di Raspberry Pi, la temperatura della CPU, l'utilizzo del disco, il carico della CUP, lo stato della memoria e altre informazioni di sistema.
La ventola del super ICE Tower Cooler è stata aggiornata alla ventola PWM RGB. Struttura a torre, tubo di rame da 5 mm, dissipatori di calore multistrato, potente ventola a 7 pale, tutte le combinazioni di cui sopra rendono questo super radiatore per Raspberry Pi. In caso di overclock, può ridurre la temperatura del Raspberry Pi da 80℃ a 40℃.
Il cappello UPS Plus caricherà le batterie fornendo allo stesso tempo l'alimentazione da una fonte di alimentazione esterna e può passare automaticamente all'uscita delle batterie quando l'alimentazione esterna non è disponibile, mantenendo il sistema in funzione senza problemi. Può anche alimentare Raspberry Pi tramite Pogo Pin senza utilizzare risorse GPIO.
La confezione include: 1 x Mini Tower Case in ABS, 2 x pannelli laterali in acrilico, 1 x display OLED da 0,96 pollici (già montato sulla custodia), 1 x UPS Plus Hat, 1 x ICE Tower Cooler, 1 x GPIO Edge Extention, 1 x Manuale di montaggio (Nota: Raspberry Pi 4B non è incluso nel pacchetto)
Supporto tecnologico:wiki.52pi.com/index.php?title=ZP-0129
42,19 € SU AMAZON
Coolwell
Uninterruptible Power Supply UPS Module for for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH Jetson Nano Supports Charging And Power Output At The Same Time 3S & 5V 5A Output
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
This 5V ups module adapting various interfaces via cables, easy to integrate into mobile robots or industrial control equipment
The Raspberry Pi ups power supply module with onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi and Jetson Nano
The Raspberry Pi ups board has multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
The Raspberry pi ups 18650 has I2C bus communication, monitoring the batteries voltage, current, power in real time; Batteries warning indicators, easy to check if the battery is connected correctly
Feel free to contact us if you need technical support
30,90 € SU AMAZON
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
33,95 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi UPS V5 Alimentatore UPS HAT, Supporto 18650 Caricabatteria Power Bank Power Management Scheda di espansione 5V per Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
UPS Plus è una nuova generazione di moduli di gestione dell'alimentazione UPS che supporta l'aggiornamento del firmware OTA e supporta l'RTC integrato.
Ci sono due chip INA219 a bordo per rilevare la tensione delle batterie e la tensione in uscita da UPS Plus a Raspberry Pi.
Compatibile con Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
La confezione include: 1 x UPS Plus per Raspberry Pi, 4 x M2.5 pilastri in rame, 4 x M2.5 viti, 4 x M2.5 stick di rame lungo, 4 x M2.5 dadi, 1 x schermo acrilico, 1 x istruzioni
Come usare, fare riferimento a wiki.52pi.com/index.php?title=EP-0136
45,99 € SU AMAZON
Waveshare
Waveshare UPS HAT per Raspberry Pi 4B, 5V Gruppo di continuità Carica e potenza di uscita allo stesso tempo
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Intestazione di estensione GPIO standard Raspberry Pi 40PIN, supporta schede serie Raspberry Pi. Comunicazione bus I2C, monitoraggio della tensione, corrente, potenza e capacità residua in tempo reale
Multi circuiti di protezione della batteria: protezione da sovraccarico/scarico, protezione da sovracorrente, protezione da cortocircuito e protezione inversa, insieme alla funzione di carica equalizzante, più sicuro e stabile
Regolatore a bordo da 5 V, corrente di uscita continua fino a 2,5 A. Uscita USB da 5 V, conveniente per alimentare altre schede
Indicatori di avvertimento delle batterie, facile da controllare se la batteria è collegata correttamente
Viene fornito con risorse di sviluppo e manuale
35,99 € SU AMAZON
VulTech
VulTech UPS60PW-DC Bianco Mini UPS 12000mAh 60Watt Gruppo di Continuità per Router, Modem, Access Point, Telecamera, Smartphone - Input 100-240 VAC, USB 5V DC 12V
20% Sconto
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
[ Continuità elettrica garantita per dispositivi a 12V, anche in caso di blackout ] Il mini gruppo di continuità Vultech UPS60PW-DC è la soluzione ideale per alimentare dispositivi elettronici essenziali come modem, router, telecamere di sorveglianza, telefoni cellulari, PC All-in-One e molti altri apparecchi che operano a 12V. In caso di interruzione della rete elettrica, entra in funzione automaticamente in pochi millisecondi e assicura un'alimentazione costante, proteggendo i dispositivi collegati da interruzioni improvvise, danni da sovraccarico e sbalzi di tensione.
[ Tripla uscita per alimentare più dispositivi contemporaneamente in totale sicurezza ] Il dispositivo è dotato di due porte DC posteriori a 12V e di una porta USB anteriore, permettendo il collegamento simultaneo di più dispositivi con differenti requisiti di alimentazione. Questa versatilità lo rende perfetto sia per l’ambiente domestico, dove può mantenere attiva la connessione internet e la videosorveglianza, sia per l’ufficio, dove può sostenere dispositivi di rete o sistemi POS durante le interruzioni di corrente.
[ Batteria al litio da 12.000 mAh per lunga autonomia e ricarica rapida in sole 3 ore ] Grazie alla batteria interna agli ioni di litio ad alta capacità (12.000 mAh), il mini UPS garantisce diverse ore di autonomia in base al carico collegato, permettendo il funzionamento continuativo dei dispositivi essenziali durante i blackout. Il sistema si ricarica completamente in circa 3 ore tramite alimentazione da rete elettrica (100–240V), ed è progettato per offrire efficienza energetica e prestazioni durature nel tempo.
[ Design compatto e discreto, ideale per ogni ambiente domestico o professionale ] Le dimensioni ridotte (159 × 104 × 37 mm) e il peso contenuto (solo 0,55 kg) rendono il Vultech UPS60PW-DC facilmente collocabile su qualsiasi scrivania, mobile o angolo tecnico. Il design sobrio ed elegante consente di integrarlo perfettamente con l’arredo di casa o dell’ufficio, mentre il sistema di raffreddamento passivo garantisce un funzionamento totalmente silenzioso, con un livello di rumorosità inferiore a 40 dB.
[ Protezione elettronica integrata contro sovratensioni, sovraccarichi e picchi di corrente ] Oltre a garantire la continuità operativa, il mini gruppo di continuità offre un’elevata protezione elettrica: rileva e gestisce in automatico sovratensioni, sovracorrenti e picchi improvvisi, salvaguardando l’integrità dei dispositivi collegati. L’efficienza del circuito interno assicura un’erogazione stabile e sicura della corrente, contribuendo a prolungare la vita utile degli apparecchi elettronici connessi.
32,11 € SU AMAZON
IBest
IBest Ethernet/USB HUB Hat for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W/Zero WH/Zero 2W Expansion Board, 1x RJ45 Ethernet Port,3X USB Ports Compatible with USB2.0/1.1
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
This is a Ethernet / USB HUB HAT for various versions of the Raspberry Pi, including Raspberry Pi 3 Model B+/ B, 2 Model B,and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
The Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
3x USB ports, compatible with USB2.0/1.1
1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
20,89 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 UPS (X1202), 4-Cell 18650 UPS (Max 5.1V 5A Output) with Wide 6-18V Input | Auto Power On | Safe Shutdown | Power Loss Detection
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1202 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, full power-off from software, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1202 is designed to be attached on bottom, enabling easy stacking with other Raspberry Pi accessory boards for enhanced applications.
【How to Power】Power via DC 5521 power jack of X1202: 6-18Vdc , ≥3A (Recommend 12V 5A 60W PSU ASIN: B0BD81W6SN); OR power via USB-C port of X1202: 5Vdc 5A via USB Type-C (Recommended 5V 5A USB-C power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1202 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case(NOT included)】Refer to X1202-C1 (ASIN: B0D4ZBXGSH)
60,89 € SU AMAZON
raspberry pi 4 ups
ups per raspberry pi
ups raspberry pi 4
dac per raspberry pi 4
joystick per raspberry pi 4
accessori per raspberry pi 4
monitor per raspberry pi 4
ups per raspberry pi 5
alimentatore per raspberry pi 4
ssd per raspberry pi 4