Raspberry Pi Display Waveshare
I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento:
19 settembre 2025
Waveshare
Waveshare 4.3 pollici DSI LCD Display per Raspberry Pi 4B, 800×480 IPS Schermo Monitor Capacitivo Touchscreen con Custodia, Supporta Raspbian/Ubuntu/Kali / WIN10 IoT
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
4.3inch capacitive touch display for Raspberry Pi 4B, IPS screen with protection case, 800x480 hardware resolution, wide angle, toughened glass panel
MIPI DSI interface, refresh rate up to 60Hz
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
49,49 € SU AMAZON
Waveshare
Waveshare 7 inch Display for Raspberry Pi 4 Capacitive Touchscreen HDMI LCD (C) 1024x600 Resolution IPS with 170° View Angle Support All Raspberry Pi/Windows 10/8.1/8/7 PC Monitor
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
7inch IPS screen, 1024x600 hardware resolution; Capacitive touch control;Backlight can be turned off to lower power consumption
Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
Note:Please set the config.txt file by adding [hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in picture)Otherwise the LCD could not work properly.
Note:If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers.
Note: There is a protective cover on the screen which may remain the scraches after we do the touch test with testing pen,you can peel it off from the green tape on the edge; to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable
59,99 € SU AMAZON
Waveshare
Waveshare Raspberry Pi 5inch Capacitive 5-Points Touch Display, Support 800×480 Resolution with DSI Interface Low Power Consumption
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/CM3/3+ requires extra adapter board
Adjustable Brightness Via Software
46,99 € SU AMAZON
Waveshare
Waveshare Raspberry Pi 1.3inch IPS LCD Display HAT, 240x240 Pixels with embedded controller, communicating via SPI interface
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)
Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V
19,99 € SU AMAZON
Waveshare
Waveshare Official Case for Raspberry Pi Touch Display 2/7-DSI-TOUCH-A / 7inch DSI LCD (H), Support Raspberry Pi 5 / Raspberry Pi Expansion Boards, Abundant Interfaces (Not for Other 7" Screens)
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
High Compatibility with Raspberry Pi 5 & Official Raspberry Pi Touch Display 2 : Precisely designed mounting holes allow seamless installation of the Raspberry Pi 5 and the Official Raspberry Pi Touch Display 2 without modifications—quick, secure, and reliable (For compatible screens, only compatible with Raspberry Pi Touch Display 2 / Waveshare 7-DSI-TOUCH-A / Waveshare 7inch DSI LCD (H). Not for other 7-inch screens - please verify your model before purchase)
Ample Interface Reservations for Hassle-free Expansion: Thoughtfully arranged to fully accommodate GPIO, HDMI, power, and other common interfaces. Compatible with various Raspberry Pi expansion boards such as PoE HAT (F) / RS485 CAN HAT / 2-CH RS485 HAT to meet diverse project development needs
Injection Molding, Sturdy Structure: Utilizing high-precision injection molding technology, the shell is formed as a single piece, offering exceptional strength and accuracy. Resistant to deformation over long-term use, it adapts to various environmental demands
Stable Support & Flexible Expansion: Equipped with built-in metal nuts on the top, bottom, and back, it supports flexible attachment of external brackets or desktop/wall mounting (brackets not included), ensuring stable support and an optimal viewing angle
Sleek Industrial Design: Featuring a modern aesthetic with smooth lines and rounded edges, this design balances practicality and visual appeal. Suitable for diverse scenarios such as education, office work, and industrial control. Quick Installation & Easy Maintenance: The modular structural design enables rapid assembly and disassembly, facilitating the installation of heat sinks, cable connections, and replacement of expansion accessories, enhancing overall maintainability
16,99 € SU AMAZON
Waveshare
Waveshare 3.5inch Capacitive Touch Display Module, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH// ESP32 / Arduino,320×480 Resolution, IPS Display
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
320×480 resolution, 262K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime
Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins
Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board
Onboard voltage translator, compatible with 3.3V / 5V operating voltage
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
29,99 € SU AMAZON
Waveshare
Waveshare 4.3inch Capacitive Touch Display for Raspberry Pi with Protection Case 800×480 Resolution IPS Wide Angle MIPI DSI Interface,Compatible with Raspberry Pi 4 ONLY
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Note：The case can compatible with Raspberry Pi4B only,other Raspberry pi models can choose the version not include the case. Supports Raspberry pi, 5-points touch, driver free.
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
Supports Retropie, driver free. Supports Pi 4B/3B+/3B.
Raspberry Pi is NOT included.
The case is 3D-printed, so you may feel the surfaces is a little bit rough, please make sure you don't mind it before purchasing.
49,99 € SU AMAZON
Waveshare
Waveshare Display 1.3 pollici LCD HAT per Raspberry Pi 4B/3B+/3B/2B/Zero W WH, 240x240 IPS Schermo RGB 65K Colori, Interfaccia SPI, con 1x Joystick, 3x Pulsanti
10% Sconto
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
1.3inch LCD Display HAT with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
High definition in small size, 240x240 pixels, RGB 65K display color, with embedded controller, communicating via SPI interface
IPS screen, wide viewing angle, better display
1x joystick, 3x pushbuttons, handy and useful
Comes with development resources and manual (examples for Raspberry Pi)
17,29 € SU AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
IBest
2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
20,62 € SU AMAZON
display raspberry pi
raspberry pi display
waveshare display raspberry
waveshare raspberry pi
display hdmi raspberry pi
display touch raspberry pi
raspberry pi display touch
raspberry pi touch display
display raspberry pi 15
display raspberry pi 2
#1 VINCITORE
