main logo

Waveshare Display Raspberry

I 10 migliori prodotti di settembre 2025
Ultimo aggiornamento: 18 settembre 2025
Waveshare
Waveshare
Waveshare 4.3 pollici DSI LCD Display per Raspberry Pi 4B, 800×480 IPS Schermo Monitor Capacitivo Touchscreen con Custodia, Supporta Raspbian/Ubuntu/Kali / WIN10 IoT
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • 4.3inch capacitive touch display for Raspberry Pi 4B, IPS screen with protection case, 800x480 hardware resolution, wide angle, toughened glass panel
  • MIPI DSI interface, refresh rate up to 60Hz
  • Supports Raspbian, 5-points touch, driver free
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
  • Supports Retropie, driver free
  • 49,49 € SU AMAZON
Waveshare
Waveshare
Waveshare 7 inch Display for Raspberry Pi 4 Capacitive Touchscreen HDMI LCD (C) 1024x600 Resolution IPS with 170° View Angle Support All Raspberry Pi/Windows 10/8.1/8/7 PC Monitor
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • 7inch IPS screen, 1024x600 hardware resolution; Capacitive touch control;Backlight can be turned off to lower power consumption
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
  • Note:Please set the config.txt file by adding [hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in picture)Otherwise the LCD could not work properly.
  • Note:If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers.
  • Note: There is a protective cover on the screen which may remain the scraches after we do the touch test with testing pen,you can peel it off from the green tape on the edge; to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable
  • 59,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi 5inch Capacitive 5-Points Touch Display, Support 800×480 Resolution with DSI Interface Low Power Consumption
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Supports Raspbian, 5-points touch, driver free
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
  • Supports Retropie, driver free
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/CM3/3+ requires extra adapter board
  • Adjustable Brightness Via Software
  • 46,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 3.5inch Capacitive Touch Display Module, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH// ESP32 / Arduino,320×480 Resolution, IPS Display
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • 320×480 resolution, 262K colors, clear and colorful displaying effect. High touch screen transmittance, fast response and long lifetime
  • Embedded with ST7796S driver chip and FT6336U capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins
  • Onboard TF card slot for storing more pictures, videos, music, etc. Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board
  • Onboard voltage translator, compatible with 3.3V / 5V operating voltage
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 29,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

85

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 inch E-Paper HAT Display Module, 800 x 480 Resolution, Supports Black/White 2 Colours, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • Note: This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
  • This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32). Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 4.3inch Capacitive Touch Display for Raspberry Pi with Protection Case 800×480 Resolution IPS Wide Angle MIPI DSI Interface,Compatible with Raspberry Pi 4 ONLY
Spedizione gratuita
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Note：The case can compatible with Raspberry Pi4B only,other Raspberry pi models can choose the version not include the case. Supports Raspberry pi, 5-points touch, driver free.
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
  • Supports Retropie, driver free. Supports Pi 4B/3B+/3B.
  • Raspberry Pi is NOT included.
  • The case is 3D-printed, so you may feel the surfaces is a little bit rough, please make sure you don't mind it before purchasing.
  • 49,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi 1.3inch IPS LCD Display HAT, 240x240 Pixels with embedded controller, communicating via SPI interface
star

77

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Please note:fbtft_device and flexfb are gone in 5.4.fbtft_device was removed because the gpio code had been reworked without fixing up fbtft_device so it didn't work.
  • This is an IPS LCD display HAT for Raspberry Pi, 1.3inch diagonal, 240x240 pixels, with embedded controller, communicating via SPI interface.Standard Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • IPS screen, wide viewing angle, better display High definition in small size 1x joystick, 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi)
  • Driver: ST7789;Display color: RGB, 65K color;perating voltage: 3.3V
  • 19,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 8.8 inch DSI Display Capacitive Touch Screen, Compatible with Raspberry Pi 5/4B/3B/CM3/3+/4/5, 480 × 1920 IPS Panel, 178° Wide Viewing Angle, DSI Display Interface
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 8.8inch DSI touch screen, supports ten-point capacitive touch control. IPS display panel with hardware resolution of 480×1920.
  • Adopt optical bonding process, the picture quality is clearer; Equipped with 6H hardness tempered glass touch cover.
  • Compatible with Raspberry Pi 5/4B/CM4/3B+/3A+/3B/CM5/CM4/CM3+/CM3; Directly drive the LCD through the Raspberry Pi's DSI interface, with a refresh rate of up to 60Hz.
  • When used with Raspberry Pi, it is compatible with Bookworm/Bullseye/Buster systems; Supports software to adjust the brightness of the backlight.
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 106,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Display 1.3 pollici LCD HAT per Raspberry Pi 4B/3B+/3B/2B/Zero W WH, 240x240 IPS Schermo RGB 65K Colori, Interfaccia SPI, con 1x Joystick, 3x Pulsanti
10% Sconto
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 1.3inch LCD Display HAT with standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • High definition in small size, 240x240 pixels, RGB 65K display color, with embedded controller, communicating via SPI interface
  • IPS screen, wide viewing angle, better display
  • 1x joystick, 3x pushbuttons, handy and useful
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 17,29 € SU AMAZON
raspberry pi display waveshare display raspberry raspberry display raspberry waveshare waveshare raspberry waveshare display display hdmi raspberry display raspberry hdmi raspberry hdmi display raspberry dac display