Raspberry Pi Sim Module
I 10 migliori prodotti di agosto 2025
Ultimo aggiornamento:
4 agosto 2025
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
30,99 € SU AMAZON
Waveshare
Raspberry Pi GSM/GPRS/Bluetooth HAT Based SIM800C Support SMS, GPRS, DTMF, HTTP, FTP, MMS, email for Band GSM 850/EGSM 900/DCS Compatible All Version of Pi/Jetson Nano
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nanos; Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc
Bluetooth 3.0, supports data transferring through Bluetooth;UART interface, for connecting host control boards like Arduino/STM32;Baudrate auto detection (1200bps ~115200bps)
Onboard voltage level translator, 3.3V by default, switch to 5V via jumper;2x LEDs for indicating the module working status;SIM card slot for 1.8V/3V SIM card
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);Supports SIM application toolkit: GSM 11.14 Release 99
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),wiki link: www.waveshare.com/wiki/SIM800C_GSM/GPRS_HAT
27,65 € SU AMAZON
Waveshare
Waveshare GSM/GPRS/GNSS Hat Expansion Board, with Low Power Consumption, Based on SIM868, Compatible with Raspberry Pi
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO Extension Header, Supporti Raspberry Pi series Boards, Jetson Nano; Supporto SIM applicazione toolkit: SAT Class 3, GSM 11.14 Release 99, USAT; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
39,99 € SU AMAZON
Waveshare
Waveshare SIM868 GSM/GPRS/GNSS HAT, Compatible with Raspberry Pi, for Easily Realizing Functions Like Making Calls, Sending Text Messages, Wireless Internet Access, etc
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Specially design for Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards; Supports SIM application toolkit: GSM 11.14 Release 99
Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc; Supports GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
Baudrate auto detection (1200bps ~115200bps); Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
Onboard USB TO UART converter for UART debugging; 6x LEDs for indicating the module working status; SIM card slot for 1.8V/3V SIM card
RTC with backup battery holder; Comes with development resources and manual (examples for Raspberry Pi/STM32)
39,99 € SU AMAZON
Waveshare
SIM7000G NB-IoT/Cat-M/EDGE/GPRS HAT For Raspberry Pi Series, Low Power Narrow Band Cellular IoT Communication Module,GNSS Positioning, Support Global Band
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.; Supports GNSS positioning (GPS, BeiDou, GLONASS)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Breakout UART control pins, to connect with host boards like Ardui/STM32
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
43,95 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
Waveshare
GSM GPRS GNSS Bluetooth HAT Module for Raspberry Pi, SIM868 Quad-Band GPS Tracker Expansion Board Compatible with Arduino, for SMS Call Data Transfer Navigation IoT Projects
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
✅ All-in-One GSM GPRS GNSS Bluetooth Functionality: This HAT module for Rasp-berry Pi supports GSM, GPRS, GNSS (GPS/Glonass/Compass/LBS), and Bluetooth 3.0 connectivity, ideal for wireless IoT, SMS, call, and tracking applications.
🍓 Quad-Band GSM with Data & Voice Capabilities: Supports GSM 850/900/1800/1900MHz bands with features like SMS, phone call, GPRS data transfer, and voice encode/decode, perfect for global cellular communication use cases.
📡 High Precision GPS & GNSS Positioning: Built-in GNSS receiver offers <2.5m horizontal accuracy with fast cold/hot start times, making this GPS module for Raspberry Pi great for real-time navigation and tracking solutions.
🔧 Raspberry Pi & Arduino Compatible Plug-and-Play HAT: Designed with standard 40PIN GPIO for easy integration with Rasp-berry Pi boards, also supports Ar-duino and STM32 via AT commands, ideal for versatile development and prototyping.
🔋 Built-in USB to UART & RTC for Stable Performance: Features onboard CP2102 USB-to-UART converter, SIM card slot, RTC with backup battery, and LED status indicators to ensure robust GSM GPRS GNSS Bluetooth connectivity and reliable operation.
38,40 € SU AMAZON
Waveshare
Waveshare USB TO M.2 B KEY Module Driver Board for M.2 Interface 4G/5G Module(NOT Included), With Quad Antennas,USB 3.1 Port for Raspberry Pi/PC/Jetson Nano to Achieve High Speed 5G Network
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules. Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules.
USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network. 4x SMA antenna connectors, easy to install the antenna.
Onboard SIM card slot for NANO SIM card. Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions.
PCB ENIG process, reserved multi slots and positioning holes for integration. Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable.
Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use.
38,99 € SU AMAZON
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible With Raspberry Pi Series Boards/Jetson Nano
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
75,99 € SU AMAZON
raspberry sim module
raspberry pi sim
raspberry pi module
raspberry pi 4 module
raspberry pi module 5
raspberry sim module 5g
raspberry pi compute module
raspberry pi gps module
raspberry pi 4 module 8gb
raspberry pi wifi module
#1 VINCITORE
