Raspberry Pi Sim
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
18 giugno 2025
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
26,34 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
Waveshare
Raspberry Pi GSM/GPRS/Bluetooth HAT Based SIM800C Support SMS, GPRS, DTMF, HTTP, FTP, MMS, email for Band GSM 850/EGSM 900/DCS Compatible All Version of Pi/Jetson Nano
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nanos; Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc
Bluetooth 3.0, supports data transferring through Bluetooth;UART interface, for connecting host control boards like Arduino/STM32;Baudrate auto detection (1200bps ~115200bps)
Onboard voltage level translator, 3.3V by default, switch to 5V via jumper;2x LEDs for indicating the module working status;SIM card slot for 1.8V/3V SIM card
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);Supports SIM application toolkit: GSM 11.14 Release 99
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),wiki link: www.waveshare.com/wiki/SIM800C_GSM/GPRS_HAT
27,65 € SU AMAZON
coolwell
Coolwell SIM7028 NB-IoT HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W for Arduino Jetson Nano Supports Global Band NB-IoT Communication with GSM Antenna
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
NB-IoT HAT for Raspberry Pi, teste di prolunga standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi e Jetson Nano, ecc.
NB-IoT HAT for Jetson Nano, supporta TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS/SSL, ecc.; supporto per applicazioni SIM: SAT Class 3, GSM 11.11, USAT
NB-IoT HAT for Arduino, interfaccia di tipo C per il debug del software; pin di controllo UART Onboard, per il collegamento con schede host come Ardui/STM32
Da USB a chip UART, il pin di comunicazione UART può essere configurato tramite jumper; slot per scheda SIM nano integrata, compatibile con schede specifiche NB-IoT
Con risorse di sviluppo online e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/ESP32)
23,99 € SU AMAZON
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible With Raspberry Pi Series Boards/Jetson Nano
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
75,99 € SU AMAZON
Waveshare
Waveshare Raspberry Pi NB-IoT/eMTC/Edge/GPRS/GNSS Hat Module Based SIM7000E Support TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail,GNSS Position for Pi Zero/Zero W/Zero WH/2B/3B/3B+
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
Download resources: www.waveshare.com/wiki/SIM7000E_NB-IoT_HAT
43,90 € SU AMAZON
KALEA-INFORMATIQUE
KALEA-INFORMATIQUE Cappello 3G 4G LTE per Raspberry Pi, Samsung ARTIK, Latte Panda o ASUS Tinker. per moduli MiniPCIe, con slot Nano SIM.
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Slot Mini PCIe plug-in, compatibile con le schede di copertura LTE, UMTS/HSPA+ e GSM/GPRS/EDGE. Slot NANO SIM.
Può essere utilizzato con un PC tramite una connessione Micro USB o con un Raspberry. Alimentazione 3A. Dimensioni: 85 X 55 X 25 mm. Compatibile con i modelli Raspberry Pi con connettore GPIO a 40 pin (4, 3, 2, B+).
Compatibile con i moduli Mini PCIe dei seguenti produttori: Quad: EC25 / EC21 / EC20 / UC20 / LTE-EP06 Sierra: serie AirPrime MC Telit: LM960, LE910V2, HE910, LE910Cx Huawei: ME909s-120, ME909s-821, ecc. Simcom: SIM7100, SIM7230, ecc. ZTE: ZM8620, ecc. U-Blox: serie MPCI-L2 Thales: PLS62W, mPLS8, mPLAS9
Compatibile con schede madri come: Raspberry Pi 4, 3, 2, B+ ASUS Tinker Board Rock 64 Samsung ARTIK Latte Panda
Inclusi nella confezione: 1 X modulo 3G/4G/LTE 1 X cavo USB/MicroUSB 1 X cacciavite 8 X viti e dadi
26,90 € SU AMAZON
EXVIST
EXVIST 4G LTE Industrial Mini PCIe a USB (Tipo-C 3.1) Adattatore W/Slot per scheda SIM per modulo WWAN/LTE 3G/4G Adatto per applicazioni M2M e IoT come Raspberry Pi Router Industrial IP Camera
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Compatibilità - È compatibile con moduli 4G LTE Mini PCIe di marche, come Quectel EC25-AF EG25-G Mini PCIe ecc.
Applicazione - Può essere ampiamente utilizzato per la connessione di rete rapida che consente di lasciare il PC connettersi alla rete 4G direttamente dopo l'installazione del modulo Mini PCIe abbinato (ESCLUDED) e del driver corrispondente.
Affidabilità - Adotta la progettazione del circuito elettrico industriale, il chip di alimentazione DC-DC e due condensatori di tantalio esterni per assicurarsi che il modulo possa sempre funzionare bene e mai offline anche in ambiente severo.
Principio - La definizione dell'interfaccia di Mini PCIe è segnale USB e 3.6V, la tensione di ingresso 5V da USB sarà convertita in 3.6V tramite chip di alimentazione DC-DC per alimentare il modulo e la scheda UIM/SIM.
Interfacce - Ci sono connettore mini PCIe per il collegamento del modulo 4G LTE, connettore USB 2.0 (Type-C 3.1), slot per scheda SIM (tipo Push-Push) che non supporta hot-pluging.
13,11 € SU AMAZON
Coolwell
A7670E LTE Cat-1 HAT For Raspberry Pi, Multi Band Support, 2G GSM/GPRS, Enabling LTE Cat-1 / 2G Communication & LBS Positioning
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL; Supports dial-up, telephone call, SMS; Supports LBS base station positioning, it is able to get the approximate position info via mobile network
TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words;Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Ardui/STM32
Onboard USB interface, for testing AT Commands, network communication, and so on; Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
SIM card slot, supports 1.8V/3V SIM card;2x LED indicators, easy to monitor the operating status;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
38,30 € SU AMAZON
raspberry pi sim module
raspberry sim
raspberry sim module
modulo sim raspberry
raspberry sim 4g
#1 VINCITORE
