main logo

Raspberry Sim

I 10 migliori prodotti di agosto 2025
Ultimo aggiornamento: 4 agosto 2025
Waveshare
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
  • Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • 77,99 € SU AMAZON
Waveshare
Waveshare
Raspberry Pi GSM/GPRS/Bluetooth HAT Based SIM800C Support SMS, GPRS, DTMF, HTTP, FTP, MMS, email for Band GSM 850/EGSM 900/DCS Compatible All Version of Pi/Jetson Nano
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nanos; Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc
  • Bluetooth 3.0, supports data transferring through Bluetooth;UART interface, for connecting host control boards like Arduino/STM32;Baudrate auto detection (1200bps ~115200bps)
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper;2x LEDs for indicating the module working status;SIM card slot for 1.8V/3V SIM card
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands);Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32),wiki link: www.waveshare.com/wiki/SIM800C_GSM/GPRS_HAT
  • 27,65 € SU AMAZON
Waveshare
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • ✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
  • ✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
  • ✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
  • ✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
  • ✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
  • 50,99 € SU AMAZON
Waveshare
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
Spedizione gratuita
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
  • Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
  • Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
  • 30,99 € SU AMAZON
coolwell
coolwell
Coolwell SIM7028 NB-IoT HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W for Arduino Jetson Nano Supports Global Band NB-IoT Communication with GSM Antenna
Spedizione gratuita
star

88

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#5

  • NB-IoT HAT for Raspberry Pi, teste di prolunga standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi e Jetson Nano, ecc.
  • NB-IoT HAT for Jetson Nano, supporta TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS/SSL, ecc.; supporto per applicazioni SIM: SAT Class 3, GSM 11.11, USAT
  • NB-IoT HAT for Arduino, interfaccia di tipo C per il debug del software; pin di controllo UART Onboard, per il collegamento con schede host come Ardui/STM32
  • Da USB a chip UART, il pin di comunicazione UART può essere configurato tramite jumper; slot per scheda SIM nano integrata, compatibile con schede specifiche NB-IoT
  • Con risorse di sviluppo online e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/ESP32)
  • 23,99 € SU AMAZON
Coolwell
Coolwell
A7670E LTE Cat-1 HAT For Raspberry Pi, Multi Band Support, 2G GSM/GPRS, Enabling LTE Cat-1 / 2G Communication & LBS Positioning
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL; Supports dial-up, telephone call, SMS; Supports LBS base station positioning, it is able to get the approximate position info via mobile network
  • TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words;Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Ardui/STM32
  • Onboard USB interface, for testing AT Commands, network communication, and so on; Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
  • SIM card slot, supports 1.8V/3V SIM card;2x LED indicators, easy to monitor the operating status;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
  • 38,30 € SU AMAZON
Waveshare
Waveshare
4G/3G/2G/GSM/GPRS/GNSS Hat Based SIM7600E-H for Raspberry Pi/Jetson Nano Support LTE CAT4 for Downlink Data Transfer/4G High-Speed Connection/Telephone Call/Sending SMS
star

79

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc; Supports GPS, BeiDou, Glonass, LBS base station positioning; Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Onboard CP2102 USB to UART converter, for serial debugging; Breakout UART control pins, to connect with host boards like Arduino/STM32
  • Onboard audio jack and audio decoder for making telephone call;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper;Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), development resources: www.waveshare.com/wiki/SIM7600E_4G_HAT
  • 82,55 € SU AMAZON
LUCKFOX
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible With Raspberry Pi Series Boards/Jetson Nano
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
  • Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
  • SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
  • On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
  • Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
  • 75,99 € SU AMAZON
Waveshare
Waveshare
Waveshare SIM7600E-H 4G-Module,utilizzato per l'accesso Internet dial-up Windows/Linux,comunicazione piattaforma cloud,localizzazione GNSS, compatibile con Raspberry Pi/Jetson Nano/ESP32/STM32
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • Applicazione tipica: Utilizzato per medicina e salute, pagamento intelligente, citofono di rete pubblica, monitoraggio ambientale, monitoraggio energetico, gestione della flotta, industria intelligente, agricoltura intelligente. Con 3 × connettore antenna IPEX, viene fornito con 2 × intestazione pin giallo e antenna FPC. Regioni applicabili: Europa/Sud-est asiatico/Asia occidentale/Africa/Cina/Corea
  • Compatibile con rete 2G/3G/4G con supporto globale. Supporta chiamate telefoniche, SMS/TCP/UDP/MQTT/DTMF/HTTP/FTP, ecc. Supporta il posizionamento della stazione base GPS, BeiDou, Glonass, GALILEO, QZSS, LBS. Interfaccia USB e UART integrata, per accesso remoto a Internet, comunicazione piattaforma cloud, posizionamento GNSS, ecc
  • Fori castellati con design a immersione in oro, piccole dimensioni, facile da integrare nel dispositivo saldando direttamente o inserendo tramite l'intestazione del pin. Adattamento USB/UART/SIM card/GPIO pin di controllo, facile da sviluppare e debug migliore espansibilità. Traduttore di tensione integrato, compatibile con schede madri MCU da 3,3 V/5 V come STM32/ESP32
  • Supporta diversi metodi di alimentazione: porta USB, pin VIN e pin VBAT (per batteria al litio da 3,7 V). Supporta alimentazione ad ampia tensione da 5 ~ 26 V e uscita ad alta corrente da 3 A, per evitare che il modulo cada e riavvii a causa del grande consumo energetico istantaneo, più stabile e affidabile nell'uso industriale
  • Slot per scheda Nano SIM integrato, supporta schede SIM da 1,8 V e 3 V, vicino al bordo del design della scheda, per un facile accesso alla scheda SIM. Viene fornito con risorse di sviluppo online e manuale (esempi per Raspberry Pi/Jetson Nano/STM32)
  • 67,99 € SU AMAZON
Waveshare
Waveshare
SIM7000G NB-IoT/Cat-M/EDGE/GPRS HAT For Raspberry Pi Series, Low Power Narrow Band Cellular IoT Communication Module,GNSS Positioning, Support Global Band
star

69

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  • Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.; Supports GNSS positioning (GPS, BeiDou, GLONASS)
  • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on; Breakout UART control pins, to connect with host boards like Ardui/STM32
  • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
  • Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
  • 43,95 € SU AMAZON
raspberry pi sim raspberry sim module raspberry sim 4g modulo sim raspberry raspberry pi sim module